NEW Baja Designs Jeep JL/JT Lighting Solutions!

[BajaDesigns]

Jeep JL/JT, Roof Bar Kits:

It is our pleasure to present the latest addition to our Jeep offerings, the JL/JT roof lighting kits. Our engineers crafted aggressive tig welded 304 Stainless Steel brackets to bring a purpose built aesthetic to your new Jeep built for our 50” S8, 50” OnX6+, or 8 light XL Linkable lighting systems. The brackets are finished in a semi-gloss black powder coat and fit perfectly with our pre-existing JL A-pillar brackets. All kits are available in either Upfitter, or standalone wiring harness versions. Our high performance lighting systems have the style and output that will add value to your rig for many years to come.

Jeep JL/JT, Roof Bar Kit, 8 XL Linkable (PN: 44-7664)
Jeep JL/JT, Roof Bar Kit, 8 XL Linkable w/Upfitter (PN: 44-7664-UP)
Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Roof-Bar-Kits.asp

Setup: Cornering | Combo | Spot | Spot | Spot | Combo | Cornering
Specs: 22,050 lumens, 182 watts, 14 amps

Kit Includes:

(1) 8 XL Linkable lightbar with black rock guards
(2) PS/DS Brackets stainless-steel & powder-coated
(2) Pre-load Support Base, stainless-steel & microtext
(1) 64-0115 Wiring Harness or (1) 64-0094 Upfitter Harness
All necessary hardware

Jeep, JL/JT, Roof Bar Kit, 50" OnX6+ (PN: 44-7666)
Jeep, JL/JT, Roof Bar Kit, 50" OnX6+ w/Upfitter (PN: 44-7666-UP)
Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Roof-Bar-Kits.asp

Specs: 39,430 lumens, 355 watts, 28.2 amps

Kit Includes:

(1) 50” OnX6+ lightbar
(2) PS/DS Brackets stainless-steel & powder-coated
(1) 64-0115 Wiring Harness or (1) 64-0094 Upfitter Harness
All necessary hardware

Jeep, JL/JT, Roof Bar Kit, 50" S8 (PN: 44-7665)
Jeep, JL/JT, Roof Bar Kit, 50" S8 w/Upfitter (PN: 44-7665-UP)
Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Roof-Bar-Kits.asp

Specs: 31,750 lumens, 300 watts, 20 amps

Kit Includes:

(1) 50” S8 lightbar
(2) PS/DS Brackets stainless-steel & powder-coated
(1) 64-0122 Wiring Harness or (1) 64-0094 Upfitter Harness
All necessary hardware

Jeep JL/JT, Rubicon Steel Bumper Kits

Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Rubicon-Steel-Bumper-Kits.asp

Baja Designs has been helping customers mount lights onto the Jeep JL since 2018, thanks in part to the OEM Rubicon Steel Bumpers. The various mounting locations on the bumper make the physical installation a breeze, and after guiding many through this process, we felt it pertinent to provide instructions and a wiring solution to make this a ready-made solution for our customers. Take your pick of some of the best lighting options that exist and add them to your Jeep JL with a streamlined installation process. It has never been easier to have the safest and most effective lighting in the game for your JL/JT.

Note: These kits mount directly to any Jeep JL or JT steel bumper using an existing mount hole. It will not fit any Sport trim models or any plastic front bumper.

Jeep JL/JT, Auxiliary/Light Bar Kits

Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Bumper-Light-Kits.asp

Not all of our customers will have received the OEM Rubicon steel bumper on their JL/JT and will have the plastic Sahara style instead. Rest assured, we have kept you in mind with the following kits. The frame mounted brackets will place either LP4, LP6, or a 30” OnX6+ in the perfect location to illuminate the trail ahead and then some! The powder coated 304 Stainless Steel brackets will withstand the harshest of climates to provide rust free performance for the miles ahead. As with the previous products mentioned, all kits are available with either a standalone harness, or Upfitter wiring solution.

Jeep, JL/JT, Dual LP4 Auxiliary Light Kit (PN: 44-7658)
Jeep, JL/JT, Dual LP4 Auxiliary Light Kit w/Upfitter (PN: 44-7658-UP)
Jeep, JL/JT, Dual LP6 Auxiliary Light Kit (PN: 44-7659)
Jeep, JL/JT, Dual LP6 Auxiliary Light Kit w/Upfitter (PN: 44-7659-UP)
Jeep, JL/JT, 30" OnX6+ Light Bar Kit (PN: 44-7657)
Jeep, JL/JT, 30" OnX6+ Light Bar Kit w/Upfitter (PN: 44-7657-UP)

Note: The 30” OnX6+ Light Bar kits may interfere with some winches.

Jeep JT, S1 Reverse Kit

Link: https://www.bajadesigns.com/products/Jeep-JT-Dual-S1-Reverse-Kits.asp

With the debut of the Jeep JT Gladiator, we were excited to learn that most features were identical to the JL. The only JT specific kit that was needed addressed a common pain point for Jeep enthusiasts; reverse lighting. Our S1 reverse kit replaces the OEM reflectors on each side of the bumper, providing a clean and elegant solution. Installation is a breeze by using existing OEM hardware and either standalone, or Upfitter wiring harnesses. The fitment matches the vehicle so well, it will make you wonder if it came that way from the factory.

Jeep JT Gladiator, Dual S1 Reverse Kit | (PN: 44-7652)
Jeep JT Gladiator, Dual S1 Reverse Kit w/Upfitter | (PN: 44-7652-UP)

Jeep JL, S2 Reverse Kit

Link: https://www.bajadesigns.com/products/Jeep-JL-Reverse-Kits.asp

For the JL, a reverse lighting kit was a must, but we were torn between our new S1 and the tried and true S2 lights. Because this kit was
meant for true trail vehicles, departure angle was our main concern. With that said, the S2 has a shorter overall height and can be
mounted above the bottom surface of the receiver hitch onto existing holes in the bumper. Short of cutting and drilling into your new
bumper for our S2 Flush mount lights, this is the cleanest way to achieve reverse lighting on your Jeep JL.

Jeep JL, Reverse Kit, Dual S2 Sport (PN: 44-7651)
Jeep JL, Reverse Kit, Dual S2 Sport w/Upfitter (PN: 44-7651-UP)

Note: This kit will not work with the sport-line rear bumpers.

Sponsored

 

[sam0329]

Jeep JL/JT, Rubicon Steel Bumper Kits

Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Rubicon-Steel-Bumper-Kits.asp

Baja Designs has been helping customers mount lights onto the Jeep JL since 2018, thanks in part to the OEM Rubicon Steel Bumpers. The various mounting locations on the bumper make the physical installation a breeze, and after guiding many through this process, we felt it pertinent to provide instructions and a wiring solution to make this a ready-made solution for our customers. Take your pick of some of the best lighting options that exist and add them to your Jeep JL with a streamlined installation process. It has never been easier to have the safest and most effective lighting in the game for your JL/JT.

Note: These kits mount directly to any Jeep JL or JT steel bumper using an existing mount hole. It will not fit any Sport trim models or any plastic front bumper.

Do you guys sell just the wiring hardness? I have my LP6 Pro ordered a while ago already. Thanks.

 

[James_a]

@Baja Designs

Can you expand on the description of the Upfitter Harness (640094). There is very little information on your website. Particularly what is the length of this harness? Is it long enough for a roof rack install? The pictures on your website make it look like a short harness and there are no specifications.

From what I've read here it seems like the upfitter harness would be used in place of wire harness 640122 if wiring to Aux switches or a switch panel such as Switch-Pro. I'm about to purchase a few lights one of which being an S8 light bar which I'm planning to install on a rhino platform and control with a Switch-pro SP-9100. I just want to ensure I'm ordering the correct harness.

 

[BajaDesigns]

Do you guys sell just the wiring hardness? I have my LP6 Pro ordered a while ago already. Thanks.

Hi Sam,

If you need a universal standalone wiring harness, you would need this one. https://www.bajadesigns.com/Products/LP9-Harness-2-light-max-Pro.asp

If you have auxiliary switches or an aftermarket switch panel, you can use the LP series module harness. For a pair of lights, you would need two.
https://www.bajadesigns.com/products/LP-Series-Controller-Module-Harness.asp

 

[sam0329]

Hi Sam,

If you need a universal standalone wiring harness, you would need this one. https://www.bajadesigns.com/Products/LP9-Harness-2-light-max-Pro.asp

If you have auxiliary switches or an aftermarket switch panel, you can use the LP series module harness. For a pair of lights, you would need two.
https://www.bajadesigns.com/products/LP-Series-Controller-Module-Harness.asp

Thanks, I ordered a set of LP6 Pro with the harness from 4wheelparts over the weekend because the 2nd option you listed is nowhere can be found anywhere in Canada here lol. And I tried to order from the site however after crazy expensive shipping and exchange rate it just doesnt make sense lol.

 

[BajaDesigns]

@Baja Designs

Can you expand on the description of the Upfitter Harness (640094). There is very little information on your website. Particularly what is the length of this harness? Is it long enough for a roof rack install? The pictures on your website make it look like a short harness and there are no specifications.

From what I've read here it seems like the upfitter harness would be used in place of wire harness 640122 if wiring to Aux switches or a switch panel such as Switch-Pro. I'm about to purchase a few lights one of which being an S8 light bar which I'm planning to install on a rhino platform and control with a Switch-pro SP-9100. I just want to ensure I'm ordering the correct harness.

That harness is 7 ft in length. I couldn't say that this would be long for a roof rack install. But I would use a piece of string and run it to where you need it on your vehicle and see if 7 ft would be enough.
This harness would be used if you had factory aux switches or an aftermarket switch panel such as a Switch-Pros or sPod. Since these applications have everything built in as far as the switch, relay, and fuse, you just need to run a power and ground from the accessory. That's what the upfitter harness accomplishes, a 7 ft run of lead and the connector.

 

[James_a]

That harness is 7 ft in length. I couldn't say that this would be long for a roof rack install. But I would use a piece of string and run it to where you need it on your vehicle and see if 7 ft would be enough.
This harness would be used if you had factory aux switches or an aftermarket switch panel such as a Switch-Pros or sPod. Since these applications have everything built in as far as the switch, relay, and fuse, you just need to run a power and ground from the accessory. That's what the upfitter harness accomplishes, a 7 ft run of lead and the connector.

Thank you!

 

[Chocolate Thunder]

Any flush mount or surface mount solutions coming soon for the rear bumper that don’t hang down just waiting to be torn off?

 

[BajaDesigns]

Any flush mount or surface mount solutions coming soon for the rear bumper that don’t hang down just waiting to be torn off?

For the JL, we won't be offering a flush mount "bolt on" kit like the JT. Although we do offer universal flush mount kits that require you to cut out an opening if you're interested.

https://www.bajadesigns.com/pc_comb...hlike~ p.optional7~up)&search_keyword=back up

We actually went off-roading in Big Bear and we didn't have any issues with clearance. Check it out!

 

[Fullfree]

Hi team:

Jeep JL/JT, Roof Bar Kits:

It is our pleasure to present the latest addition to our Jeep offerings, the JL/JT roof lighting kits. Our engineers crafted aggressive tig welded 304 Stainless Steel brackets to bring a purpose built aesthetic to your new Jeep built for our 50” S8, 50” OnX6+, or 8 light XL Linkable lighting systems. The brackets are finished in a semi-gloss black powder coat and fit perfectly with our pre-existing JL A-pillar brackets. All kits are available in either Upfitter, or standalone wiring harness versions. Our high performance lighting systems have the style and output that will add value to your rig for many years to come.

Jeep JL/JT, Roof Bar Kit, 8 XL Linkable (PN: 44-7664)
Jeep JL/JT, Roof Bar Kit, 8 XL Linkable w/Upfitter (PN: 44-7664-UP)
Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Roof-Bar-Kits.asp

Setup: Cornering | Combo | Spot | Spot | Spot | Combo | Cornering
Specs: 22,050 lumens, 182 watts, 14 amps

Kit Includes:

(1) 8 XL Linkable lightbar with black rock guards
(2) PS/DS Brackets stainless-steel & powder-coated
(2) Pre-load Support Base, stainless-steel & microtext
(1) 64-0115 Wiring Harness or (1) 64-0094 Upfitter Harness
All necessary hardware

Jeep, JL/JT, Roof Bar Kit, 50" OnX6+ (PN: 44-7666)
Jeep, JL/JT, Roof Bar Kit, 50" OnX6+ w/Upfitter (PN: 44-7666-UP)
Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Roof-Bar-Kits.asp

Specs: 39,430 lumens, 355 watts, 28.2 amps

Kit Includes:

(1) 50” OnX6+ lightbar
(2) PS/DS Brackets stainless-steel & powder-coated
(1) 64-0115 Wiring Harness or (1) 64-0094 Upfitter Harness
All necessary hardware

Jeep, JL/JT, Roof Bar Kit, 50" S8 (PN: 44-7665)
Jeep, JL/JT, Roof Bar Kit, 50" S8 w/Upfitter (PN: 44-7665-UP)
Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Roof-Bar-Kits.asp

Specs: 31,750 lumens, 300 watts, 20 amps

Kit Includes:

(1) 50” S8 lightbar
(2) PS/DS Brackets stainless-steel & powder-coated
(1) 64-0122 Wiring Harness or (1) 64-0094 Upfitter Harness
All necessary hardware

Jeep JL/JT, Rubicon Steel Bumper Kits

Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Rubicon-Steel-Bumper-Kits.asp

Baja Designs has been helping customers mount lights onto the Jeep JL since 2018, thanks in part to the OEM Rubicon Steel Bumpers. The various mounting locations on the bumper make the physical installation a breeze, and after guiding many through this process, we felt it pertinent to provide instructions and a wiring solution to make this a ready-made solution for our customers. Take your pick of some of the best lighting options that exist and add them to your Jeep JL with a streamlined installation process. It has never been easier to have the safest and most effective lighting in the game for your JL/JT.

Note: These kits mount directly to any Jeep JL or JT steel bumper using an existing mount hole. It will not fit any Sport trim models or any plastic front bumper.

Jeep JL/JT, Auxiliary/Light Bar Kits

Link: https://www.bajadesigns.com/products/Jeep-JL-JT-Bumper-Light-Kits.asp

Not all of our customers will have received the OEM Rubicon steel bumper on their JL/JT and will have the plastic Sahara style instead. Rest assured, we have kept you in mind with the following kits. The frame mounted brackets will place either LP4, LP6, or a 30” OnX6+ in the perfect location to illuminate the trail ahead and then some! The powder coated 304 Stainless Steel brackets will withstand the harshest of climates to provide rust free performance for the miles ahead. As with the previous products mentioned, all kits are available with either a standalone harness, or Upfitter wiring solution.

Jeep, JL/JT, Dual LP4 Auxiliary Light Kit (PN: 44-7658)
Jeep, JL/JT, Dual LP4 Auxiliary Light Kit w/Upfitter (PN: 44-7658-UP)
Jeep, JL/JT, Dual LP6 Auxiliary Light Kit (PN: 44-7659)
Jeep, JL/JT, Dual LP6 Auxiliary Light Kit w/Upfitter (PN: 44-7659-UP)
Jeep, JL/JT, 30" OnX6+ Light Bar Kit (PN: 44-7657)
Jeep, JL/JT, 30" OnX6+ Light Bar Kit w/Upfitter (PN: 44-7657-UP)

Note: The 30” OnX6+ Light Bar kits may interfere with some winches.

Jeep JT, S1 Reverse Kit

Link: https://www.bajadesigns.com/products/Jeep-JT-Dual-S1-Reverse-Kits.asp

With the debut of the Jeep JT Gladiator, we were excited to learn that most features were identical to the JL. The only JT specific kit that was needed addressed a common pain point for Jeep enthusiasts; reverse lighting. Our S1 reverse kit replaces the OEM reflectors on each side of the bumper, providing a clean and elegant solution. Installation is a breeze by using existing OEM hardware and either standalone, or Upfitter wiring harnesses. The fitment matches the vehicle so well, it will make you wonder if it came that way from the factory.

Jeep JT Gladiator, Dual S1 Reverse Kit | (PN: 44-7652)
Jeep JT Gladiator, Dual S1 Reverse Kit w/Upfitter | (PN: 44-7652-UP)

Jeep JL, S2 Reverse Kit

Link: https://www.bajadesigns.com/products/Jeep-JL-Reverse-Kits.asp

For the JL, a reverse lighting kit was a must, but we were torn between our new S1 and the tried and true S2 lights. Because this kit was
meant for true trail vehicles, departure angle was our main concern. With that said, the S2 has a shorter overall height and can be
mounted above the bottom surface of the receiver hitch onto existing holes in the bumper. Short of cutting and drilling into your new
bumper for our S2 Flush mount lights, this is the cleanest way to achieve reverse lighting on your Jeep JL.

Jeep JL, Reverse Kit, Dual S2 Sport (PN: 44-7651)
Jeep JL, Reverse Kit, Dual S2 Sport w/Upfitter (PN: 44-7651-UP)

Note: This kit will not work with the sport-line rear bumpers.

Hi Team:

I wrote a new post asking a few question about a full set for my new Jeep, please can you be so kind to read this and reply as much you can?

Many thanks in advance.

 

[BeachPilot74]

Hi team:

Hi Team:

I wrote a new post asking a few question about a full set for my new Jeep, please can you be so kind to read this and reply as much you can?

Many thanks in advance.

I've been trying to get them to answer questions as well. Even emailed, SO far I cant get an answer.. Not going to drop $2500 on something that I can't get an answer for. I don't think they monitor the forums much....

@Baja Designs

 

[BajaDesigns]

I've been trying to get them to answer questions as well. Even emailed, SO far I cant get an answer.. Not going to drop $2500 on something that I can't get an answer for. I don't think they monitor the forums much....

@Baja Designs

Hey Beachpilot,
Thanks for reaching out, we do not have any messages from you if you can resend it we will take a look.
Best,
Brock

 

[BeachPilot74]

Y’all

Hey Beachpilot,
Thanks for reaching out, we do not have any messages from you if you can resend it we will take a look.
Best,
Brock

Y’all replied to my thread about the Linkable lights and the measurement I needed. You asked a question, and then I replied. Crickets since then…

lol

I’ll send y’all a message.

 

[BajaDesigns]

Y’all

Y’all replied to my thread about the Linkable lights and the measurement I needed. You asked a question, and then I replied. Crickets since then…

lol

I’ll send y’all a message.

Hey beachPilot74,
Sorry we miss that I currently am looking for the thread and I will get back to you with an answer.
Best,
Brock

 

[BeachPilot74]

Hey beachPilot74,
Sorry we miss that I currently am looking for the thread and I will get back to you with an answer.
Best,
Brock

@Baja Designs

Thanks Brock,

Here is a link

https://www.jlwranglerforums.com/fo...nkable-for-jeep-jl-height.99288/#post-2054149

Sponsored