NEW Baja Designs Jeep JL/JT Lighting Solutions!

[BajaDesigns]

@Baja Designs

Thanks Brock,

Here is a link

https://www.jlwranglerforums.com/fo...nkable-for-jeep-jl-height.99288/#post-2054149

Hey Beachpilot74,
We do not have an exact measurement or a tech file on the clearance of the lights, however, after speaking to our engineers the light is going to be roughly 1-2inches above the roof.
The light as a whole is approximately 4inches tall and sits below the hoodline.
Best,
brock

Sponsored

 

[BeachPilot74]

Hey Beachpilot74,
We do not have an exact measurement or a tech file on the clearance of the lights, however, after speaking to our engineers the light is going to be roughly 1-2inches above the roof.
The light as a whole is approximately 4inches tall and sits below the hoodline.
Best,
brock

@Baja Designs Thanks Brock!! Appreciate you helping me out. This solidified my decision now to go ahead and get this on order. Thanks a bunch for getting me that info!!

Garrett

 

[jlandry287]

@Baja Designs Thanks Brock!! Appreciate you helping me out. This solidified my decision now to go ahead and get this on order. Thanks a bunch for getting me that info!!

Garrett

Just gonna say I got my first set of Bajas 2 weeks ago. Incredible lights, they’re pricey but worth it

 

[BeachPilot74]

Just gonna say I got my first set of Bajas 2 weeks ago. Incredible lights, they’re pricey but worth it

I’ve got their squadron pros, love them. But I’m wanting the 8 Linkable light bar for my Jeep as well.

 

[BajaDesigns]

@Baja Designs Thanks Brock!! Appreciate you helping me out. This solidified my decision now to go ahead and get this on order. Thanks a bunch for getting me that info!!

Garrett

No worries, sorry for all the delays. Let me know if you want to get that order placed for you.
Best,
Brock

 

[BajaDesigns]

Just gonna say I got my first set of Bajas 2 weeks ago. Incredible lights, they’re pricey but worth it

Hey Jlandry287,
Glad you are happy, we appreciate you sharing the all the love and support! Let us know if you need anything else.
Best,
Brock

 

[Fast-n-Furious]

@Baja Designs I know it's an old thread, it seems there are still confusions about the Toggle V.S. Upfitter wiring options when it comes to the S2 reverse Kit, at least for me.

My JLUR 392 comes with the factory AUX switches, should I go with Upfitter so I can wire to the Aux 4? Is the wire long enough to route from rear bumper to the Aux switch in engine bay? Thanks.

 

[BajaDesigns]

@Baja Designs I know it's an old thread, it seems there are still confusions about the Toggle V.S. Upfitter wiring options when it comes to the S2 reverse Kit, at least for me.

My JLUR 392 comes with the factory AUX switches, should I go with Upfitter so I can wire to the Aux 4? Is the wire long enough to route from rear bumper to the Aux switch in engine bay? Thanks.

The harnesses you will need :

Squadron/S2 55 Inch Splitter Qty:1
Squadron/S2 2-Pin 10 ft. Extension Qty:1
Squadron/S2/S1 Upfitter Wiring Harness Qty:1

This will allow you to connect to your factory Aux switches on the vehicle.

Bill Sonevongxay | Forum Sales & Support
Email: [email protected] | Phone: (760) 560-2252
​

 

[Fast-n-Furious]

The harnesses you will need :

Squadron/S2 55 Inch Splitter Qty:1
Squadron/S2 2-Pin 10 ft. Extension Qty:1
Squadron/S2/S1 Upfitter Wiring Harness Qty:1

This will allow you to connect to your factory Aux switches on the vehicle.

Bill Sonevongxay | Forum Sales & Support
Email: [email protected] | Phone: (760) 560-2252
​

Thanks Bill. Looks like the S2 sport reverse kit has all of these when I choose the "Upfitter" wiring type.

Sponsored