Mattk11
Well-Known Member
- Thread starter
- #1
Inspired by DavidRam's build I decided to post my own. If you ever saw my previous build in my JK, you will see a lot of similarities and a few changes. I'm really glad the new Jeeps have the large touch screen that can be connected via optical, it will make things much cleaner and more integrated this time around.
Following the theme:
Budget:
Unknown, I'll figure that out when I get there. This won't be a audiophile high end build, but will be middle of the road with the goal being clean clear audio and bass present when the top it off and on the interstate. This will be an active three way system for the front and two 10" subs under the front seats.
Components:
Signal - Factory 8.4" head unit with PAC Audio unit
Amps - Arc Audio KS 125.4 (70wpc into 4ohms for 2 tweeters and 2 midrange); Arc Audio KS125.2 BX2 (~100-110 wpc into 3 ohms for the Mid-Woofers); Sundown Audio SFB-1500 (1200w into 2ohms; 1750w into 1.3 ohms - more on that later)
Processor - JL Audio TwK D8
Speakers - Tweeters - 1" Scanspeak D3004/60200; 3" Midrange - CDT Chrome ES-CRM-3K; 6.7" Mid-Woofer - CDT Chrome ES-CRM-6K
Subwoofer - Sundown SD4-D2 x2. adding third - more on that later
Connections:
KnuKonceptz Krystal Kable RCAs
KnuKonceptz Karma speaker wire
KnuKonceptz power wire
Sound Deadening:
Noico mat
Noico closed cell foam
Fabrication:
Fiberglass Under-seat Subwoofer enclosures - have to account for floor vents under the seats
Fiberglass Tweeter Pods
Speaker pods - added Scanspeak aperiodic vents (used these in my JK, but not sure if they really help of not)
Amp rack from PVC for waterproofing
Fiberglass Cargo cover with integrated 3rd Sub for summer top-off driving
Following the theme:
Budget:
Unknown, I'll figure that out when I get there. This won't be a audiophile high end build, but will be middle of the road with the goal being clean clear audio and bass present when the top it off and on the interstate. This will be an active three way system for the front and two 10" subs under the front seats.
Components:
Signal - Factory 8.4" head unit with PAC Audio unit
Amps - Arc Audio KS 125.4 (70wpc into 4ohms for 2 tweeters and 2 midrange); Arc Audio KS125.2 BX2 (~100-110 wpc into 3 ohms for the Mid-Woofers); Sundown Audio SFB-1500 (1200w into 2ohms; 1750w into 1.3 ohms - more on that later)
Processor - JL Audio TwK D8
Speakers - Tweeters - 1" Scanspeak D3004/60200; 3" Midrange - CDT Chrome ES-CRM-3K; 6.7" Mid-Woofer - CDT Chrome ES-CRM-6K
Subwoofer - Sundown SD4-D2 x2. adding third - more on that later
Connections:
KnuKonceptz Krystal Kable RCAs
KnuKonceptz Karma speaker wire
KnuKonceptz power wire
Sound Deadening:
Noico mat
Noico closed cell foam
Fabrication:
Fiberglass Under-seat Subwoofer enclosures - have to account for floor vents under the seats
Fiberglass Tweeter Pods
Speaker pods - added Scanspeak aperiodic vents (used these in my JK, but not sure if they really help of not)
Amp rack from PVC for waterproofing
Fiberglass Cargo cover with integrated 3rd Sub for summer top-off driving
Sponsored