Need help with KC wiring

[Matt878]

Hey guys

I took the 6 inch slimlites off my 2022 JLR i traded in (no aux switches) and installed them on my 26 Rubicon X with the switches

For now i installed them as if i dont have auxiliary switches but i would like to take advantage

These have the 3 way switch for low power and full power..I suppose ill use AUx1 for full power and 3 for low?

I have no idea how to wire these up for use with the AUX buttons and would really love some guidance

the wires KC sent me include a relay and a inline fuse...

Do i just remove those?

Really dont know where to start. I am comfortable with mechanical work but wiring stumps me

thank you!

Sponsored

 

[X35]

This harness from KC will allow you to control them with the factory headlamps. Low beam will run the backlight and pulling the hi-beam switch they’ll go full bright. If you do wire them to your aux switches or the KC harness you don’t need the relay and fuse.

https://www.kchilites.com/wire-harness-adapter-jeep-jl-headlight-6325.html

 

[Matt878]

im afraid the above harness is to wire them up to turn on with headlights which i dont need

 

[X35]

That is correct.

To wire them to your aux switches remove the relay and fuse from your lamp harness. Connect the ground wire to the ground stud on inside of right fender by the battery. Connect the power supply wire for backlight to aux 3 or 4 and the high beam to aux 1 or 2.

 

[Dlit]

Kc has amazing service, call and ask. They walked me thru in detail every light I installed on my Jeep, even after I told them to explain it to me like I'm a kid who eats paste.

Sponsored