Q’s JLUR
Well-Known Member
- First Name
- Quen
- Joined
- Jul 21, 2019
- Threads
- 7
- Messages
- 49
- Reaction score
- 24
- Location
- North Carolina
- Vehicle(s)
- 2019 Unlimited Rubicon
- Occupation
- Lead Engineer
- Thread starter
- #1
Today we mounted 35x12.50x17 Nitto Ridge Grapplers on my 19 JLUR. If you go strictly by the numbers these are only supposed to be 2.3” bigger in diameter and 1.3” wider. In person these tires look wayyy bigger than 285/70 stockerzzz. Regardless, there was absolutely no rubbing anywhere on all 4 corners and we made sure to max the steering out in each direction. I am putting a 2.5” spacer Lift on next week so I won’t be able to comment on clearance when your coils are loaded but anyone who thinks you’ll rub with regular day to day driving...you won’t... not even close!
I will say the one thing we found when mounting the spare was that diameter wise your totally fine but the tire pressed the tail light bracket into the rear glass wiper only when fully tight. This can easily be corrected with a .5” spacer very cheaply.
No wheel spacers & Bone stock suspension.
I will say the one thing we found when mounting the spare was that diameter wise your totally fine but the tire pressed the tail light bracket into the rear glass wiper only when fully tight. This can easily be corrected with a .5” spacer very cheaply.
No wheel spacers & Bone stock suspension.
Sponsored