Motobilt Rear Crusher Bumper w/Light Cut Outs

[Headbarcode]

Did you go with this spot version/ pattern light of the rigid lights

They're definitely not spots, which would have a clear non-textured lense. They are either flood or scene/work lighting.

Sponsored

 

[damageinc321]

No video, I'm sorry but its very simple. 3x3 pods using a surface mount. They will hang upside down on the inside of the Motobilt bumper. I grounded at the tow hitch and fished the power wire, with a metal coat hanger, through the inside of the passenger frame rail, up into the engine bay and over to the pre-wired bundle for the Aux Switches by the battery.

Could you just wire those pods to run off the stock reverse lights?

 

[4xnaz]

Could you just wire those pods to run off the stock reverse lights?

Of course you can! But I wanted them on a switch to be able to use on demand for night wheeling and not just to illuminate while in reverse.

 

[Ruri]

I got this Motobilt crusher bumper and I used Baja Design lights. I used this harness from Offroad Alliance. It taps into the reverse light and turns on when I reverse. It also taps up to an aux switch through the engine bay. I used this same harness on my Craptor.

https://offroadalliance.com/products/custom-reverse-light-harness-for-baja-designs-reverse-kit/

 

[conFUcius]

Could you just wire those pods to run off the stock reverse lights?

I’m with @4xnaz as the lights are too bright for well lit parking lots, not to mention, I like the ability to turn on the lights for extra lighting as needed.

 

[4xnaz]

I've been through a lot of changes since installing this Motobilt bumper and Rigid Industries light pods, but stayed with that initial set up all along the way.

 

[conFUcius]

I've been through a lot of changes since installing this Motobilt bumper and Rigid Industries light pods, but stayed with that initial set up all along the way.

Nice! Here’s mine…

 

[Headbarcode]

I've been through a lot of changes since installing this Motobilt bumper and Rigid Industries light pods, but stayed with that initial set up all along the way.

The American Adventure Labs taillights and blank off panels look awesome! Curious, what cargo area carrier do you have?

 

[4xnaz]

The American Adventure Labs taillights and blank off panels look awesome! Curious, what cargo area carrier do you have?

Thank you!!!! The spare tire carrier is made by Excessive Industries and its called the Gatekeeper.

Sponsored