crackrk
Well-Known Member
- Joined
- Dec 4, 2019
- Threads
- 15
- Messages
- 125
- Reaction score
- 107
- Location
- Minneapolis, MN
- Vehicle(s)
- 2018 JLU 6-speed
- Thread starter
- #1
I’m hoping someone can confirm which Motive Power Bleeder fits the JL 3.6l motor.
From motive’s website it says:
Thru most of the 2000s jeeps used the 0103 kit (0113 metal version) using the 1103 (1113) adapters. As production of some smaller Jeeps are using Fiat components there is a chance that the 1100/1109 is being used. The 1100/1109 is simple to tell - it is a female threaded cap that is about 1.75". It actually screws on 1.5-2 full turns onto the reservoir. If your compact Jeep is newer than 2014 please make sure it does not use the 1100/1109 type cap.
So to me it sounds like the 0103 adaptor should fit, but would be great to have someone confirm before ordering if possible.
From motive’s website it says:
Thru most of the 2000s jeeps used the 0103 kit (0113 metal version) using the 1103 (1113) adapters. As production of some smaller Jeeps are using Fiat components there is a chance that the 1100/1109 is being used. The 1100/1109 is simple to tell - it is a female threaded cap that is about 1.75". It actually screws on 1.5-2 full turns onto the reservoir. If your compact Jeep is newer than 2014 please make sure it does not use the 1100/1109 type cap.
So to me it sounds like the 0103 adaptor should fit, but would be great to have someone confirm before ordering if possible.
Sponsored