Mopar Trailer Wiring Harness Installation

Boatbuilder88

Well-Known Member
Joined
Mar 13, 2017
Messages
850
Reaction score
1,457
Location
New Jersey
Vehicle(s)
'19 Wrangler JL Sting Gray
Vehicle Showcase
1

Not sure if I would have had the patience for this install. So glad I ordered the trailer tow package from the factory.





Advertisement

 

At Risk Ute

Well-Known Member
Joined
Jun 7, 2019
Messages
135
Reaction score
187
Location
USA
Vehicle(s)
JL
One of the other online sellers did another installation video. Surprisingly easy install after watching it a few times.
 

JAY1941

Well-Known Member
First Name
Jay
Joined
Jul 12, 2019
Messages
59
Reaction score
41
Location
Massachusetts
Vehicle(s)
2020 JLUR
Occupation
LE
the install is very easy to do yourself at home. I recommend the mopar hitch as it is very sturdy and the hardware is nice.
 

NCBound

Active Member
First Name
Corey
Joined
Apr 6, 2019
Messages
38
Reaction score
8
Location
Greensboro, NC
Vehicle(s)
2018 Jeep Wrangler JLUS
I did the install myself and found it much easier to run the wire from the rear down, into the passenger side frame rail and then snaked it all the way to the front passenger wheel well. There is a cutout there that allows you to run the wire directly up to the battery there and the amount of wire spanning between the frame cutout and the wheel well liner is negligible. Its held up for around 1000 miles so far for me, and in my eyes theres much less risk of me snapping an interior trim tab and causing a rattle that would drive me crazy for the rest of my time in my JL
 

JAY1941

Well-Known Member
First Name
Jay
Joined
Jul 12, 2019
Messages
59
Reaction score
41
Location
Massachusetts
Vehicle(s)
2020 JLUR
Occupation
LE
Oh Come on there weren’t that many pan.... okay yeah there were but if I can do it without breaking anything, I’m sure it’s doable for others

7373C3EB-6EEC-4BBC-9C29-47E30D3603AF.jpeg
 

suss1173

Member
First Name
Michael
Joined
May 23, 2020
Messages
20
Reaction score
3
Location
Nassau County NY
Vehicle(s)
14 JKU, E46M, E70d,
I’m having a hard time getting through the grommet in the passenger side foot well. Certainly not as easy for me as they make it look in the quadratec video. I’ve tried to use a wire snake, a large zip tie, like they used in the video, and a coat hanger. No matter what I do it seems to get caught up and not get all the way through
 

Advertisement




Motor City Aftermarket
 



Advertisement
Top