Jeeperz Kreeperz
Well-Known Member
- Joined
- Jan 15, 2018
- Threads
- 40
- Messages
- 454
- Reaction score
- 490
- Location
- New Hampshire
- Vehicle(s)
- 2021 JLUR 4xe
- Thread starter
- #1
Installing this now. Seems there are some hybrid coolant parts that mount under the OEM battery tray in the 4xe, which obviously don’t exist in the non-4xe version.
I checked with @Genesis Offroad before installation, and they said the engine compartment near the battery is the same as in the regular 2.0, and they‘ve sold their dual battery kit to 4xe owners and not heard of any issues, so I was hoping it would just drop in.
I’m working on repurposing the OEM metal bracket that sits between the OEM battery tray and the air box, and using that as a bracket back at the firewall to support the coolant parts that are now hanging in mid-air.
Anyone done this install yet? What did you do with that coolant valve and hoses, etc? (See pic below with blue circled items - those three threaded studs were previously attached to bottom of the OEM battery tray.)
I checked with @Genesis Offroad before installation, and they said the engine compartment near the battery is the same as in the regular 2.0, and they‘ve sold their dual battery kit to 4xe owners and not heard of any issues, so I was hoping it would just drop in.
I’m working on repurposing the OEM metal bracket that sits between the OEM battery tray and the air box, and using that as a bracket back at the firewall to support the coolant parts that are now hanging in mid-air.
Anyone done this install yet? What did you do with that coolant valve and hoses, etc? (See pic below with blue circled items - those three threaded studs were previously attached to bottom of the OEM battery tray.)
Sponsored
Last edited: