Maximus-3
Well-Known Member
- First Name
- BRENDAN
- Joined
- Oct 17, 2018
- Threads
- 31
- Messages
- 385
- Reaction score
- 530
- Location
- Detroit,MI
- Website
- www.maximus-3.com
- Vehicle(s)
- 2020 Gladiator Rubicon, 2018 JLUR, 2015 JKU
- Occupation
- Aftermarket Specialists
- Thread starter
- #1
Introducing the most aggressive hoop in our line-up...the Maximus-3 JL Stinger Bar (part# JL1001SN) It compliments and transforms the look of the factory JL Rubicon steel bumper.
The Maximus-3 Stinger Bar is made from heavy-duty steel tubing: 2" OD (center) and 1 3/8" OD (sides) The tubes are welded to 6-gauge steel flanges which are bolted to factory holes in the JL Rubicon steel bumper. The Sting Bar comes with internal reinforcement brace brackets - that tie the Stinger to the chassis frame for added strength and protection.
Features:
* Designed specifically for the factory JL Rubicon Steel Bumper
* 100% bolt-on. NO cutting, NO drilling, does NOT require taking off the bumper.
* Dual Coat Finish: Base Coat = Zinc rich primer powder. Top Coat = Durable Black Textured powder
* Works well with other Maximus-3 products (winch plates, light brackets, etc.)
* Weights about 15 pounds
* Made in the USA
Want to add lights with your Stinger? Then grab some of our Maximus-3 Light Brackets:
* 10" LED Light Bar Brackets (part# JL1010LB)
* Auxiliary Light Brackets - for round or square lights (part# JL1007AB)
Spice-up your Rubicon steel bumper with the attractive-looking protection of a Maximus-3 JL Stinger Bar.
The Maximus-3 Stinger Bar is made from heavy-duty steel tubing: 2" OD (center) and 1 3/8" OD (sides) The tubes are welded to 6-gauge steel flanges which are bolted to factory holes in the JL Rubicon steel bumper. The Sting Bar comes with internal reinforcement brace brackets - that tie the Stinger to the chassis frame for added strength and protection.
Features:
* Designed specifically for the factory JL Rubicon Steel Bumper
* 100% bolt-on. NO cutting, NO drilling, does NOT require taking off the bumper.
* Dual Coat Finish: Base Coat = Zinc rich primer powder. Top Coat = Durable Black Textured powder
* Works well with other Maximus-3 products (winch plates, light brackets, etc.)
* Weights about 15 pounds
* Made in the USA
Want to add lights with your Stinger? Then grab some of our Maximus-3 Light Brackets:
* 10" LED Light Bar Brackets (part# JL1010LB)
* Auxiliary Light Brackets - for round or square lights (part# JL1007AB)
Spice-up your Rubicon steel bumper with the attractive-looking protection of a Maximus-3 JL Stinger Bar.
Sponsored