M.O.R.E JL Wrangler Build and Parts (SEMA 2018 - JLWF Coverage)

Where can I find the bolt coverings for the main crossbar on the belly skids? I bought MORE, but it did not come with these.

 

How can no one design a compressor mount for engine bay!! Ahhhhh!!

 

I ended up adding the Rock Hard 4x4 Rock Dome Bolt Head Protectors in both the large and small sizes to my M.O.R.E. skids shortly after installing them. This might not be the best picture, but all I have on hand...

 

Shouldn’t the bolts on the skid plate be countersunk?

 

can someone tell me what that plate on the tailgate is supposed to be for?

 

was wondering the same thing. I too have the MORE skids. going to scrape them up this weekend!

 

No provision for backup sensors...

 

+1

 

I'm wondering the same...

 

There is at least one supplier out there doing the countersunk bolt heads in what looks like a really nice kit, but one could debate if its better to have a mangled bolt head to still be able to grab unto to remove, as opposed to what do you do if you damage a countersunk head, or one of these tapered bolt protectors to the point where you can't get a wrench on or in the bolt anymore.

 

If it’s counter sunk it has way less chance of getting damaged. If it does just use a dremel and cut a slit in the head and use a straight edged screwdriver to back the bolt out.

 

I verified with the owner the skids now ship with bolt protectors shown. 2 Door Skids coming in couple weeks and will have the install in my build post. Going with the aluminum.

 

Nice full coverage skid plates. Does it come painted or bare? What material and what thickness?

 

The oil pan transmission skid plate and transfer case skid plate comes in 3/16" Steel or 1/4" Aluminum
The gas tank skid plate is 3/16" steel or 3/16" aluminum, since it over lays the factory skid.