Looking for this wheel style with Tires mounted

[Spearmin]

What wheels and tire combo is that?

The tires are Cooper Discoverer STT Pro.. the wheels are Procom 69s 17x9. I'd buy them again in a heart beat. I think I paid 107. each for the wheels with a coupon at 4WD Hardware.

Sponsored

 

[blnewt]

No scratches yet, that's the reflection from the painted lines in Cabela's parking lot.

I was sad, but then it looked like the camera was playing tricks w/ me lol. Nice ride!

 

[MyDaughters20JL]

‘20 JLUR
315 ko2’s on +35 offset wheels

keep in mind, a -6 offset will put your tires about 41mm, or 1.6 inches further out than mine sit

 

[MyDaughters20JL]

No one is showing the correct offset..
Stock is minus 5..??


Is this it

https://www.4wheelparts.com/p/black...ck-1795ary-85127g71/_/R-DWJH-1795ARY-85127G71

stock wheels are a +44mm offset

 

[-Jonny-]

The tires are Cooper Discoverer STT Pro.. the wheels are Procom 69s 17x9. I'd buy them again in a heart beat. I think I paid 107. each for the wheels with a coupon at 4WD Hardware.

Really good looking combo on your jeep.

 

[Spearmin]

Really good looking combo on your jeep.

Thanks.... Took me a good 6mths to decide on that combo.

 

[msdesignltd]

‘20 JLUR
315 ko2’s on +35 offset wheels

keep in mind, a -6 offset will put your tires about 41mm, or 1.6 inches further out than mine sit

This ..I can live with!
Thanks

 

[msdesignltd]

Ok, I am getting close..

DOES ANYONE HAVE THE ARMORY WHEEL IN 17x9.5 ET-18 OR SIMILAR BLK RHINO WHEEL WITH THE BFG 315 70 17 TIRE..
PLEASE POST A PIC OF OVER HANG UNDERHANG OF TIRE FENDER.

 

[Steel8083]

I installed fuel rebel 5 wheels +1 offset and 315 70r15 KO2 today. Held a straightedge up against widest part of sidewall they were 2 1/4 outside the fender the widest part of the tread was 1 1/4" past fender

 

[msdesignltd]

It would be so much easier if someone made an original style fender that reached out Plus 2 inches...
Somehow I just want the profile to be flush..

 

[Spearmin]

I think your going to be filled with regret if you don't go with a -6. I walked this rode your on not long ago. Finally I got fed up and convinced myself, if I really don't like it I'll sell them and start over. In the end wouldn't change damn thing. Also, I did not see you mention a lift here. If your putting on 35s you definitely need a lift or things will rub.

 

[msdesignltd]

I think your going to be filled with regret if you don't go with a -6. I walked this rode your on not long ago. Finally I got fed up and convinced myself, if I really don't like it I'll sell them and start over. In the end wouldn't change damn thing. Also, I did not see you mention a lift here. If your putting on 35s you definitely need a lift or things will rub.

a rubicon is 2 inches above stock, I have a rubicon recon which is 1/2 inch over the 2 ".
I am told 35's will fit easily..
Yes.this is frustrating.the wheel I want is not happening.

 

[Spearmin]

a rubicon is 2 inches above stock, I have a rubicon recon which is 1/2 inch over the 2 ".
I am told 35's will fit easily..
Yes.this is frustrating.the wheel I want is not happening.

Ahhhh... Didn't realize it was a Rubicon.

 

[Macaw1]

All those fake bolts and nuts just makes it look like a Posers Jeep and give mud a way to hold on.

 

[msdesignltd]

All those fake bolts and nuts just makes it look like a Posers Jeep and give mud a way to hold on.

Its meant to stop a hand grenade or a ballistic weapons attack..Thats what I need!

Sponsored