Looking for this wheel style with Tires mounted

[Cleoncini]

Did you check Customoffsets? They usually advertise a better price if you buy tires with wheels.

Sponsored

 

[Shoebox303]

Mine came mounted and balanced with TPMS installed from 4wd Parts. I called several vendors and they were the cheapest for me.

 

[msdesignltd]

No one is showing the correct offset..
Stock is minus 5..??


Is this it

https://www.4wheelparts.com/p/black...ck-1795ary-85127g71/_/R-DWJH-1795ARY-85127G71

 

[zrickety]

This is my 2021 "DIESELCON" with the black rhino arsenal wheels and 37" Milestar Patagonia. I found it cheaper to find the best deal for each separate. Most companies won't discount both

products

Off topic, what is that front bumper?

 

[Stuckinthesand]

Here is the specs you can get with those wheels. FYI unless you are going 17x8 you aren’t getting anything that will tuck under your fender. I’m not sure you can put that tire on a 17x8.

https://www.blackrhinowheels.com/off-road-wheels-rims-armory.php

 

[Buckster]

Discount tire is not showing armory or bf good KO2

They have the BFGs in stock and if you PM @Discount Tire, they can probably get the wheel and price you a complete package.

 

[blnewt]

Might also look into the Warn wheels, similar look that you're after
https://www.warn.com/epic-wheels-jack-hammer-black-106689

 

[msdesignltd]

The tire will be the BF Goodrich 315 /70/ 17

 

[Spearmin]

looks like a really heavy wheel. How do you check your rotors with this installed?

I haven't had any issues..

 

[msdesignltd]

With this Black rhino armory wheel....What offset should I be looking for..same as stock?

 

[blnewt]

With this Black rhino armory wheel....What offset should I be looking for..same as stock?

Depends if you plan to lift and if you have any fender laws in your state. Got room w/ those wider Rubicon axles to run a positive offset, it sounds like you want a more aggressive look though, so offset in the zero to -12 should suffice and allow some good room if you lift it down the road.

 

[DarkWater]

Hello all,

So many wheels to choose from, I am always perplexed.
I have been see sawing between wheels for 6 months now and I have decided to go with this one.
Are there any companies that sell the whole package . 4 or 5 wheels with tires mounted and balanced.

I am looking for the BF Goodrich 315 / 70 17 with the softer compound.
one more question..what should offset be if I want little or no tire sticking out past fender overhang.
Its a 2020 Rubicon Recon.


Thanks in advance for any recommendation.

Black Rhino 1795ARY-85127G71 Armory Wheel 17x9.5
I'm not sure if anyone else made note of this but the Armory wheel you picked was notorious for rusting at one point? I really like the rugged look and Black Rhino makes good wheels generally but those Hex bolts around the edge are steel and I saw numerous bad reviews because they rusted almost immediately. Hopefully they have addressed and fixed the issue by now.

 

[RamMan]

Continue to think long and hard about the offset and tire size before blowing your load. I also didn't want anything sticking out, for fear of it looking too adolescent. However, I finally went with a -6 offset and 35s and the setup and stance is perfect. I have seen other jeep where the tires are the same size but more tucked under and it detracts to the presence in my opinion. Mine stick out about 1" past the fender, and that is perfect.

QuadraTec or RealTruck sell the tire / wheel combo, I think. That -6mm sounds good. On mine, with 9" x 17"e Fuel Wheels, the sidewalls are out a little; but I've covered the tread with custom fit mud flaps, & Raptor Style, Go Rhino Running Boards. All this keeps the mud / brush off the side panels.

 

[Howardlv22]

Off topic, what is that front bumper?

It’s by rugged ridge it’s called the oculas I love it!

 

[Discount Tire]

Thank you to all who recommended Discount Tire - we greatly appreciate the support!

The Armory is available in two 17-inch size in the JL 5-127(5x5) PCD: 17x8 ET+30 and 17x9.5 ET-18. For reference, both sizes we can order.

@msdesignltd - you had mentioned concerns with the wheel sticking out too far. If you have a tap measure, you get a good idea how each size will fit.

Using the factory Rubicon wheels (front lip) as the starting point, the 17x9.5 ET-18 is going to sit 3.5-inches further out. The 17x8 ET+30 is going to sit 3/4-inch further out. Here's visual, orange is factory specs and blue are the two Armory sizes.

Sponsored