Sponsored

Lets see your 392 on 35's or 37's stock suspension or lifted...

BeepBeepIssaJeep

Well-Known Member
First Name
Bee
Joined
Aug 30, 2021
Threads
1
Messages
115
Reaction score
234
Location
NC
Vehicle(s)
2022 Rubicon 392 Xtreme Recon
39x13.5x17 Bdgoodrich Baja kr2 on Method Race wheels MR106 bead locks. Running on JKS HD 3.5” springs front and rear (also running a 1.25” spacer in the rear), stock shocks, RPM 2.5 ton steering: draglink, tierod, and track bar(front and rear), Fox ATS steering stabilizer, synergy rear track bar relocation, as well as their V2 steering brace kit, Evo adjustable full short arm upgrade, Coupled with AEV front geometry correction bracket (for a superior ride comfortability), 4.56 Advantek gears, rear Dana 44 chromoly axle shaft upgrade, Dana 44 diff covers (front and rear),tazer mini.. waiting on the market to catch up to the 392 platform.. surely there are some full kits out by now..? I was running 37x12.5 Bfg KM3s on the stock wheels before this current set up.. I now have a set of 38x12.5x17 Nitto ridge grapplers that I will be running soon. As soon as I get them mounted and balanced I’ll take some photos and post.
B88A58A8-B1E1-44A7-9FD1-039168761FAF.jpeg
A5A13F6F-D6B3-4908-8FC8-6D8B2B5A880D.jpeg
28779E89-36CA-48DD-855C-7AED471379B8.jpeg
5FB072D3-855C-4F89-B177-BA8C7606C1F8.jpeg
0169515A-4C4C-4948-BE27-64EF9036AEB4.jpeg
FB482405-A4DB-4D21-9B41-FD2CBE1794B1.jpeg
6 to midnight. very nice
Sponsored

 

GrayHawk20

Well-Known Member
First Name
Cory
Joined
Apr 7, 2021
Threads
11
Messages
1,767
Reaction score
2,110
Location
Florida
Vehicle(s)
*See Signature for Info*
Occupation
(Architectural) Jr. Project Coordinator
Vehicle Showcase
2
Correct! This is my current set up. Here are some photos of the 37 KM3 on the stock wheels.

FBD977F1-7FD2-4DD0-B1E2-2CFB108B361F.jpeg


2249322C-7FA1-43EC-AA21-3A135B9AA55C.jpeg


E4065D73-95F6-4F45-BF76-DFF7AD44E1BB.jpeg


6D7B85BE-D112-463E-A8D6-15ECBA181396.jpeg
Any offset for the 37’s seeing how 37’s are truly that size I might just go that route instead but want a little offset
 

NolaJeep

Member
First Name
Ryan
Joined
Sep 28, 2021
Threads
0
Messages
6
Reaction score
35
Location
New Orleans
Vehicle(s)
2021 Jeep Wrangler Rubicon 392
Any offset for the 37’s seeing how 37’s are truly that size I might just go that route instead but want a little offset
On this set up with the stock 392 wheels and the KM3 37x12.50x17 I was running teraflex 1.75” spacers, it pushed the wheels out some..personally I like the stance of the wheels pushed out a bit more than what I was running with the spacers…
 

Outrun

Well-Known Member
Joined
Feb 15, 2019
Threads
9
Messages
915
Reaction score
1,408
Location
PNW
Vehicle(s)
2021 392XR
39x13.5x17 Bdgoodrich Baja kr2 on Method Race wheels MR106 bead locks. Running on JKS HD 3.5” springs front and rear (also running a 1.25” spacer in the rear), stock shocks, RPM 2.5 ton steering: draglink, tierod, and track bar(front and rear), Fox ATS steering stabilizer, synergy rear track bar relocation, as well as their V2 steering brace kit, Evo adjustable full short arm upgrade, Coupled with AEV front geometry correction bracket (for a superior ride comfortability), 4.56 Advantek gears, rear Dana 44 chromoly axle shaft upgrade, Dana 44 diff covers (front and rear),tazer mini.. waiting on the market to catch up to the 392 platform.. surely there are some full kits out by now..? I was running 37x12.5 Bfg KM3s on the stock wheels before this current set up.. I now have a set of 38x12.5x17 Nitto ridge grapplers that I will be running soon. As soon as I get them mounted and balanced I’ll take some photos and post.
B88A58A8-B1E1-44A7-9FD1-039168761FAF.jpeg
A5A13F6F-D6B3-4908-8FC8-6D8B2B5A880D.jpeg
28779E89-36CA-48DD-855C-7AED471379B8.jpeg
5FB072D3-855C-4F89-B177-BA8C7606C1F8.jpeg
0169515A-4C4C-4948-BE27-64EF9036AEB4.jpeg
FB482405-A4DB-4D21-9B41-FD2CBE1794B1.jpeg
Love the wrap!
 

Sponsored

Stealth

Well-Known Member
Joined
Dec 11, 2017
Threads
16
Messages
81
Reaction score
15
Location
Los Angeles
Vehicle(s)
2021 Rubicon 4xe
I’m not planning to regear for my 35s. It still has amazing power, so I don’t feel the need to do it. Curious about those with 37s though...

I’m on Nitto Trail Grapplers 35x11.50. No spacers, no lift.
62F2E7A2-5F3B-4FAC-88DF-3B72D18F7AC4.jpeg
No rubbing?
 

cmtaylo3

Active Member
Joined
Feb 9, 2021
Threads
1
Messages
29
Reaction score
41
Location
florida
Vehicle(s)
1982 yugo
392 peeps with a lift…how’s your front driveshaft angle at the transfercase? Pics would be great along with what lift you’re running.

In the planning stages for my 392XR and am curious if any of you have driveline vibes and/or any front driveshaft boot tears/leaks since installing a lift?
I had same concerns about front driveshaft so I ordered a set of driveshafts from Adams,then installed a teraflex 2 inch spacer to realize the front driveshaft has much more droop than I anticipated and I don't believe a driveshaft is necessary for a 2 inch spacer
 

dgerb

Well-Known Member
First Name
Don
Joined
Jun 15, 2021
Threads
30
Messages
207
Reaction score
199
Location
Sedona, Arizona
Vehicle(s)
2021 JL 392
Here's the Beast with STT Pro's 37x12.5x17 on stock suspension. Vision Nemesis 17x9 -12 offset (4.53 BS). No Rubbing on the street. Still running stock gearing, has plenty of power, however don't see 8th gear too often. Dropped about 1 mpg city driving. Probably going to 4.56 down the road.

20210924_143922_resized.jpg


20210924_143938_resized.jpg


20210924_170852_resized.jpg
 

GrayHawk20

Well-Known Member
First Name
Cory
Joined
Apr 7, 2021
Threads
11
Messages
1,767
Reaction score
2,110
Location
Florida
Vehicle(s)
*See Signature for Info*
Occupation
(Architectural) Jr. Project Coordinator
Vehicle Showcase
2
Here's the Beast with STT Pro's 37x12.5x17 on stock suspension. Vision Nemesis 17x9 -12 offset (4.53 BS). No Rubbing on the street. Still running stock gearing, has plenty of power, however don't see 8th gear too often. Dropped about 1 mpg city driving. Probably going to 4.56 down the road.

Jeep Wrangler JL Lets see your 392 on 35's or 37's stock suspension or lifted... 20210924_170852_resized


Jeep Wrangler JL Lets see your 392 on 35's or 37's stock suspension or lifted... 20210924_170852_resized


Jeep Wrangler JL Lets see your 392 on 35's or 37's stock suspension or lifted... 20210924_170852_resized
I assume it doesnt like 8th with 3.73 and 37's? Similar to my Sahara on 35's with 3.45 gears.
 

Sponsored

GrayHawk20

Well-Known Member
First Name
Cory
Joined
Apr 7, 2021
Threads
11
Messages
1,767
Reaction score
2,110
Location
Florida
Vehicle(s)
*See Signature for Info*
Occupation
(Architectural) Jr. Project Coordinator
Vehicle Showcase
2
It may not like 8th, but when you put your foot down....it really goes like a bat out of hell....
I would sure hope it would go like a bat out of hell for 75k lol
 

Comac90

Well-Known Member
First Name
Teak
Joined
Apr 10, 2021
Threads
13
Messages
345
Reaction score
647
Location
NC
Vehicle(s)
392XR
here's mine. 37x12.5 tires on AEV wheels. stock suspension so far. adding a half-inch spacer to the front next week just to level it out a touch

Jeep Wrangler JL Lets see your 392 on 35's or 37's stock suspension or lifted... 20210924_170852_resized
have you been off-road/flexed this setup out? Any rubbing?
 
 



Top