jriggsaz
Member
Thank you! I love the versatility of the Cyclone V2s!
Sponsored
Thank you! I love the versatility of the Cyclone V2s!
This looks great!Took a cue from @jack bauer and reached out to @pixeldecals about color matching my @KC HiLiTES covers.
They came out perfectly. As much as I like the yellow āKCā, I wanted something to blend a little better with the orange/black combo.
Thanks, Don - @pixeldecals You always deliver quality stuff.
Nice install! How did you mount the fuse block, it looks good. Thanks for the feed back. I sent this over to Robert.Update - All installed. Had some awesome help over the phone from Robert @KC HiLiTES
Cyclone V2 LED 6-Light - Rock Light Kit
https://www.kchilites.com/cyclone-2-led-rock-light-kit-universal-6-pc.html
I used the 2 L brackets for the back, 2 Z brackets for the middle, and bent the other two Z brackets to L for the front. Overall, a fun install. I will be changing the white to Green/Red for Christmas. Will update this this when I have those pics.
Night Pics...
For the fuse box, I just zipped tied it to some larger cables under it. That made it easy to manipulate.Nice install! How did you mount the fuse block, it looks good. Thanks for the feed back. I sent this over to Robert.
It looks like your bar is angled down quite a bit. I would recommend aiming it at night, then tighten everything down. It should be angled up higher though. Then make sure that the center bump is above the windshield, not on the glass. Also make sure if you curved the bar, make sure all the bolts between are tightened down. The picture looks like you added a slight curve. Let me know if this helps and fixes the sound.Got my pro6 light bar on, but I'm getting this weird creaking from it when moving at 40+? It sounds like it's coming from my windshield. I preloaded the bar by pushing out and adjusting the center rubber bumper, so I'm wondering if I pushed it out too hard? Anyone else have this issue?
I think I figured out the issue. The rubber center bump squeaks against the paint on my windshield. I threw some anti-squeak tape on so we'll see how that works.It looks like your bar is angled down quite a bit. I would recommend aiming it at night, then tighten everything down. It should be angled up higher though. Then make sure that the center bump is above the windshield, not on the glass. Also make sure if you curved the bar, make sure all the bolts between are tightened down. The picture looks like you added a slight curve. Let me know if this helps and fixes the sound.
Interesting. Can you send me some pictures of your set up? I'll send you a message and see if I can help.I think I figured out the issue. The rubber center bump squeaks against the paint on my windshield. I threw some anti-squeak tape on so we'll see how that works.
It's pretty tough to get the center bump to really grip well on the top of the windshield... I might cut the end of it off to get it positioned at a better angle; haven't decided yet. The movable bracket (piece on the other side of this camera angle) just barely hits on the back of one of the lights when I try to put it flush on the top of the windshield.
That water in the back looks amazing.ā¦.
Yes our Flex Array is discontinued. We do have a new light coming out soon to replace it. I am personally very excited for it. We have been reviving our flex line. Hence the FE3 and FE4. Soon is the FE3 Dual Mode. Our Flex line all have the ability to add on a Amber Cover. For the upcoming Dual Mode, you can snap on the same FE3 Amber Cover if your installation allows room for the cover. If you are looking for a 10" Flex Bar with amber shield, if you can wait for the release, I would recommend wait for the new upcoming light. It is really nice!Looks like the Kc array have been discontinued? Is there anything else similar available?
also BD amber lights are yellow and donāt really match the amber on the vehicle already. Can anyone confirm if KC amber lights are closer matching?
lastly, am I correct to assume the new KC flex 3 dual mod will be able to have both amber and white lights?
Youāre totally wrecking my progress of saving for the Gravity Pro 6 lightbar & mount.Yes our Flex Array is discontinued. We do have a new light coming out soon to replace it. I am personally very excited for it. We have been reviving our flex line. Hence the FE3 and FE4. Soon is the FE3 Dual Mode. Our Flex line all have the ability to add on a Amber Cover. For the upcoming Dual Mode, you can snap on the same FE3 Amber Cover if your installation allows room for the cover. If you are looking for a 10" Flex Bar with amber shield, if you can wait for the release, I would recommend wait for the new upcoming light. It is really nice!