Gvind
Member
You must be referring to the inner bracket. You can just put the bolt from underneath and tighten it until you can feel the bolt and nut has tighten. Then adjust the bracket back to the position (closing the underneath opening) and just tighten the bolt from outside (attached pic).Thanks for sharing. Just got one question: how did you put on the normal bolt & screws (M10) since we put on the bracket it will block the underneath... I am thinking of rivet nuts but I didn't order it from mopar. Are these rivet nuts come with special spec? or I may find a replacement from homdepot.
You can still go for rivet nuts (M10) from homedepot but you will need special rivet gun for that. Which will cost you extra. Whole reason I avoided rivet nuts.
Sponsored