Sponsored

JLUR suspension install on JLU with LCA’s that are 7/16th longer

lalalofsky

Well-Known Member
First Name
Ben
Joined
Sep 27, 2020
Threads
129
Messages
716
Reaction score
364
Location
Lawrence, Kansas
Vehicle(s)
2020 JLU Sport
I have RK lower control arms that I just bought. The springs are from a hardtop 3.6 with tow. Going on my JLU with a hardtop no Tow. Would my RK LCA’s that are 7/16 longer than stock work, or would i have too much castor? I know the factory Mopar 2” lift LCA’s are 1/4 longer, and these RK is just a bit longer than that, but I’m trying to figure out if i will have too much castor after that? I have an adjustable front trac bar from RK that I was going to install as well but thought i can just throw that on no worries
Sponsored

 
OP
OP
lalalofsky

lalalofsky

Well-Known Member
First Name
Ben
Joined
Sep 27, 2020
Threads
129
Messages
716
Reaction score
364
Location
Lawrence, Kansas
Vehicle(s)
2020 JLU Sport
I, assuming I will have something around or over 7 degrees, but is that okay
 

Rock Krawler Suspension

Well-Known Member
First Name
Tech Support
Joined
Oct 15, 2017
Threads
4
Messages
570
Reaction score
732
Location
Waterford New York
Website
rockkrawler.com
Vehicle(s)
Red JLUR, White JLUR, Yellow JL (3 so far), Bikini Diesel JLU, Billet JT, Hydro Blue JT
You will have a lot of caster. I don't have the math in front of me but I'd bet upwards of 9 degrees. It certainly wouldn't be advised.
Sponsored

 
 



Top