Zpanki
Member
- First Name
- Steve
- Joined
- Jun 27, 2021
- Threads
- 0
- Messages
- 7
- Reaction score
- 9
- Location
- Waynesville NC
- Vehicle(s)
- Mojave, GSA
I used a sawzall intentionaly leaving some wiggle room then cleaned it up with the angle grinder finaly polished it with my dremel. What I did was way overkill. You will be fine with a cut off wheel on an angle grinder, just go slow. This project really is way easier than it seems at first. I love the result and would do it again in a heart beat.
Sponsored