bkjolly
Well-Known Member
- First Name
- Brian
- Joined
- Mar 11, 2018
- Threads
- 0
- Messages
- 296
- Reaction score
- 198
- Location
- Owensboro, KY
- Vehicle(s)
- 75 CJ-5
Do you see yourself swapping out the engine in the future or are you happy with the 5.38 gears and the 3.6? IJust a couple of updates on my Build. Overall, it has been excellent in performance. I did have some rubbing issues with the corners of the RockHard front mid width bumper when the tire was stuffed at full turns, but was able to shave the aluminum very cleanly. I also added 3/4” body spacer and 1” more bump stop to lessen stuffing clearance and maintain full spring travel. I also had to trim rear wheel opening several times, but it seems to be fine now.
When trimming the edges off the stock flares, the white fender clips are annoying as they can be seen now, will probably replace them with black ones.
The Red Neck Ram does not have the power of the PSC on my JK, but I think it has enough and I’m not as worried about breaking something else by being able to force steering rather than finessing it.
I bought a new Arb Twin compressor and also mounted my power tank. Shop ran airlines to front bumper corners which is really nice. Last week I had them put in a valve so I could easily select which air source I want to use, but I think the valve is restricting airflow, so I’ll probably remove it.
Sponsored