desync0
Well-Known Member
- Joined
- Mar 30, 2019
- Threads
- 2
- Messages
- 103
- Reaction score
- 146
- Location
- Ontario, Canada
- Vehicle(s)
- 2019 2dr Sport in Mojito!
- Vehicle Showcase
- 1
- Thread starter
- #1
So I went to double check where my JK Moab's were hanging up and do some measuring with a caliper, turns out the back up camera "tube" isn't only flared at the the base but it's also every so slightly tapered over the entire length.
So out comes the utility knife and tada my spare fits lol It still needs some sanding it's probably going to be a pita to remove on the side of the road but I don't have any on hand so that's a tomorrow me problem.
You can see the marks from shaving it with the knife but those will be gone after some sanding and a quick flame polish. I didn't give a ...... when I was shaving it since I had already figured I was going to have to replace it with something aftermarket.
It doesn't both me, but the sport camera cover doesn't even come close to fitting
So out comes the utility knife and tada my spare fits lol It still needs some sanding it's probably going to be a pita to remove on the side of the road but I don't have any on hand so that's a tomorrow me problem.
You can see the marks from shaving it with the knife but those will be gone after some sanding and a quick flame polish. I didn't give a ...... when I was shaving it since I had already figured I was going to have to replace it with something aftermarket.
It doesn't both me, but the sport camera cover doesn't even come close to fitting
Sponsored
