Jeep Releases Mopar 2" Lift Kit For Wrangler 4xe

[Sboden]

Yep, I specifically asked about their 2.5 spacer lift. It should work but they won't say it will work until R&D is done sometime in July.

Sponsored

 

[Sboden]

Found a shop that was comfortable doing it so 2.5 inch Teraflex spacer lift with Fox 2.0 shocks, adjustable track bar, shock extenders, Black Rhino 17 inch 9 inch wide Overland wheels, Falken 37X12.50 Wildpeak AT3 tires. If needed, they will get adjustable LCA's. It is scheduled for May 18th. I'm pumped to get back to basically what I had on my previous wrangler. I can then post a profile picture of the current one instead of my previous one.

 

[lightsout]

Found a shop that was comfortable doing it so 2.5 inch Teraflex spacer lift with Fox 2.0 shocks, adjustable track bar, shock extenders, Black Rhino 17 inch 9 inch wide Overland wheels, Falken 37X12.50 Wildpeak AT3 tires. If needed, they will get adjustable LCA's. It is schedules for May 18th. I'm pumped to get back to basically what I had on my previous wrangler. I can then post a profile picture of the current one instead of my previous one.

That was likely the difference I was asking about the 1.5" When I talked to them. You probably should consider at least the lower from LCA's.

 

[Sboden]

Yep, I put if it is needed they will get them put on later when they come in. I'm not ordering them ahead of time. I can run a week without them on if they are needed.

 

[LJ_3M121318]

Question on this lift kit. Can we also add say terra Flex spacers on top of it? So get 2 in from Mopar and 2 in from spacer for 4 in?

Just thinking down the road with this lift kit. If I want to go higher I'd prefer not to take out the Mopar and replace it with a 4 in kit and added costs so thinking an additional spacer would do the job?

 

[LJ_3M121318]

Just noticed my Mopar lift has covers on the rear shocks. Can I take this off if I wanted to? Or is it needed to keep it clean?

 

[lightsout]

Just noticed my Mopar lift has covers on the rear shocks. Can I take this off if I wanted to? Or is it needed to keep it clean?

Those are to protect the shafts from front wheel rock throws You want to keep those if you plan to drive on gravel or off road.

 

[LJ_3M121318]

Those are to protect the shafts from front wheel rock throws You want to keep those if you plan to drive on gravel or off road.

Do you know the name of the part? Would be interested to see if I can get one in the blue instead of this black

 

[hoag4147]

Do you know the name of the part? Would be interested to see if I can get one in the blue instead of this black

Black is it. No alternatives

 

[lightsout]

Do you know the name of the part? Would be interested to see if I can get one in the blue instead of this black

yes you can remove those and install these

Shock boots Amazan

 

[hoag4147]

yes you can remove those and install these

Shock boots Amazan

Cool. Go old school

 

[aug0211]

Do you know the name of the part? Would be interested to see if I can get one in the blue instead of this black

Black is it. No alternatives

yes you can remove those and install these

Shock boots Amazan

How about a rattle can with an enamel coating on top to protect from paint chips?

 

[Moses212]

How about a rattle can with an enamel coating on top to protect from paint chips?

Better off to wrap in 3M vinyl. Heat it and it'll conform to the shape and won't chip..

 

[aug0211]

Better off to wrap in 3M vinyl. Heat it and it'll conform to the shape and won't chip..

Good call

 

[Moses212]

Hey everyone, sorry if I'm missing this, but is the 2" Mopar lift a full 2" lift on the 4xe?

Sponsored