Jeep humor waiting room ( ** NO POLITICS ** )

[Laststand]

Kinda dead in here today

Does make it easy to catch up when you're away from the computer for a couple of hours or so.

 

[Steveo]

 

[obwahn]

Does make it easy to catch up when you're away from the computer for a couple of hours or so.

Glad we could help you out today. hehe

 

[obwahn]

Just a pickin and a grinnin

 

[MtBaldyDave]

Kinda dead in here today

I ditched work to work on graybeard re torque and tighten the f n bump stops for the last time.

 

[Steveo]

I ditched work to work on graybeard re torque and tighten the f n bump stops for the last time.

Those were a PITA. Flexhead and strap wrenches to the rescue. (still a PITA)

 

[Sadragna]

Ouch

 

[Steveo]

Ouch

 

[CrazyKASG]

Drama. They be crazy.

 

[MtBaldyDave]

Those were a PITA. Flexhead and strap wrenches to the rescue. (still a PITA)

Almost spot welded those fuckers.
Turns out my giant channel locks and long ratchet did the trick.

 

[Steveo]

Almost spot welded those fuckers.
Turns out my giant channel locks and long ratchet did the trick.

 

[MtBaldyDave]

So after installing the 2” Mopar lift graybeard grew 3.25” roughly give or take a seaword hair.

 

[Steveo]

So after installing the 2” Mopar lift graybeard grew 3.25” roughly give or take a seaword hair.

I failed to measure before the lift but based on other before-lift measurements I found on these forums, Ofsteve got about 2" in the front and 3.5" in the back (with a mostly empty tank)

 

[MtBaldyDave]

I sold a lot off after leaving the automotive industry. But I would had the opposite result if she knew what my Snap On bill was every month.

 

[MtBaldyDave]

I failed to measure before the lift but based on other before-lift measurements I found on these forums, Ofsteve got about 2" in the front and 3.5" in the back (with a mostly empty tank)

Was I supposed to measure the back

Oops