Is this where Tazur plugs in?

[shekmark]

I just looked under my dash for first time because my new Tazer is still in the box. Is this the port it plugs into ?

Sponsored

 

[rustyshakelford]

It’s behind there and higher. Two black plugs need to be unplugged and the tazer placed in line

Brett

 

[AnARcHy]

I just looked under my dash for first time because my new Tazer is still in the box. Is this the port it plugs into ?

It depends on if you have the Tazer JL, or the Tazer JL Mini/Lite version. All of them require you to reach up about 6” above the part in your picture (which is the OBD port) where you will see two smaller plugs. Unplug those and plug them back into the Tazer Mini/Lite, or if you have the Tazer JL there is a part that those plugs go into.

If you have the Tazer JL, you will plug the Tazer into the OBD port that is in your picture.

I hope that helps.

 

[shekmark]

Thanks. I got the lite. I will look up there higher. Its off to the side like this port but higher.

 

[WranglerMan]

Thanks. I got the lite. I will look up there higher. Its off to the side like this port but higher.

See my compare install here https://www.jlwranglerforums.com/forum/threads/tazer-smart-stop-start-showdown.21707/ i know you have the lite but the lite module plugs in the same as the bypass module

 

[AnARcHy]

Thanks. I got the lite. I will look up there higher. Its off to the side like this port but higher.

Yes, directly above there, about 6” higher behind the dash. Right where the metal brace is, that is going to hinder you in getting those plugs out!

 

[jeepdabest]

It's for the Keurig P150 with OBD connector. Never add water. Mine is plumbed directly into the radiator.

Sponsored