Jeep’n Jay
Well-Known Member
- First Name
- Jay
- Joined
- Aug 17, 2019
- Threads
- 24
- Messages
- 239
- Reaction score
- 289
- Location
- Salt Lake City
- Vehicle(s)
- 2018 JLU Sport
- Thread starter
- #1
I had an alignment performed last week. Castor was 6.2 which is right about where I wanted it, total toe was 18* which is right about perfect. Took the Jeep out for 140 mile drive and was fighting wandering worse than I ever have, felt like a constant fight to keep it straight. I had never experienced it that bad before. Keep in mind my entire suspension is new with Synergy track bars front and rear, and Synergy drag link and tie rod. I was ready to replace the ball joints despite only having 22k miles on them, the ball joints pass all the "tests" on the Jeep. Also there is zero play in my steering gear. No dead spots at all.
Fast forward to today. I decided to check the torque on the pinch clamps to make sure the alignment tech tightened them down correctly. I noticed on the drag link the tie rod ends were not parrallel with each other. One was about 45* off from the other end. I loosened the clamp and made them parrallel. Took the Jeep out on the road and freeway and it is the tightest and straightest it has ever been. I actually took my hands off the wheel for about a 1/4 mile and it went down the road perfectly straight. I can't believe it. Did this simple adjustment actually make this big of a difference?
Fast forward to today. I decided to check the torque on the pinch clamps to make sure the alignment tech tightened them down correctly. I noticed on the drag link the tie rod ends were not parrallel with each other. One was about 45* off from the other end. I loosened the clamp and made them parrallel. Took the Jeep out on the road and freeway and it is the tightest and straightest it has ever been. I actually took my hands off the wheel for about a 1/4 mile and it went down the road perfectly straight. I can't believe it. Did this simple adjustment actually make this big of a difference?
Sponsored