I can't keep the windshield clean ffs

[UncleJimmy]

Nu Finish used to be great. It had ceramic in it decades before the current products came out. The company was bought and it was reformulated for some reason. The new stiff works pretty well, but no more ceramic.

The biggest issue with it is that it's hard to remove, you almost need a buffer. Also, it leaves terrible white residue on any black textured plastic it touches. For that reason I would not try using it on aJL.

BTW, if any of you get wax stains on black plastic, original Rain X will take it out. Found this out by trail and error one day, trying what I had on hand in the garage.

Thanks for the info and the RainX/plastic tip. I always seem to get wax on the plastics.

Sponsored

 

[Saddle Tramp]

Not sure if anyone mentioned Topcoat F11. There are a lot of mixed reviews, every retailer has a favorite. I have used this stuff for a years and it easy to work with. Great Results

 

[Oakridge88]

Topcoat F11 EXPOSURE LIMITS ENGINEERING CONTROLS Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Benzene, 1-chloro-4- (trifluoromethyl)- 98-56-6 TWA: 2.5 mg/m3 F TWA: 2.5 mg/m3 F TWA: 2.5 mg/m3 dust - Section 7 – Handling and Storage Section 8 –

Eye Contact Causes serious eye irritation Skin Contact Causes skin irritation; may cause an allergic skin reaction Ingestion Not applicable Inhalation May cause respiratory irritation NUMERICAL MEASURES OF TOXICITY – COMPONENT INFORMATION Chemical Name Oral LD50 Dermal LD50 Inhalation LC50 Benzene, 1-chloro-4- (trifluoromethyl)- 98-56-6 = 13 g/kg ( Rat ) > 2 mL/kg ( Rabbit ) = 33 mg/L ( Rat ) 4 h 1-Methyl-2-pyrrolidone 872-50-4 = 3914 mg/kg ( Rat ) = 8 g/kg ( Rabbit ) = 3.1 mg/L ( Rat ) 4 h Proprietary additive - - - Proprietary additive - - - Proprietary additive = 2615 mg/kg ( Rat ) -

Sponsored