How to reset TPMS Symbol lit on dash board

[Bob Burd]

Reset with a Tazer or?
Setting to 36(psi) equates to 2.5 bar, so it seems the lights should stay in.

Sponsored

 

[Chocolate Thunder]

SO I came here with a similar problem. But my tires have dropped down to 30 psi (315/70/17 Patagonias) which I have read is a perfectly acceptable level. It may actually be preferred. So is there no way to run at 30 psi and not have the indicator trigger?

Inflate them fully and drive until the light goes off. After they are fully cooled, slowly deflate to 30 psi. Stop immediately when it shows 30. Slowly because when you’re deflating quickly the display may show 30 but drop lower a bit later because the dash display is a bit behind the sensor.

 

[Chupacabra]

That's why you should always fill your tires with nitrogen....... /s

I do fill mine with Nitrogen, just 78% though

Sponsored