Sponsored

How to add reverse LED cube lights to SPORT without LED/Tow package

onesight1

Active Member
First Name
George
Joined
Apr 13, 2019
Threads
7
Messages
28
Reaction score
60
Location
denver
Vehicle(s)
2018 JLU Sport, 2010 Genesis Coupe RSPEC, K7 GSXR, B2 Bandit
As the title suggests

I have a 18" Sport without LED package or Towing (I've converted to aftermarket LED front and taillights, and also added tow hitch/ harness from CURT. Its a 4 pin, so i dont think those have reverse indicators, sadly.


Every thread I see on the matter... the JL's are rubicons so its different, or they have the tow package and tie the lights to wire connected to it. I just need them to come on when i reverse


I figured I could tap into the Rear tail lights, but cant figure it out if im using the right colors to splce into
Sponsored

 
OP
OP
onesight1

onesight1

Active Member
First Name
George
Joined
Apr 13, 2019
Threads
7
Messages
28
Reaction score
60
Location
denver
Vehicle(s)
2018 JLU Sport, 2010 Genesis Coupe RSPEC, K7 GSXR, B2 Bandit
okay, I decided to just examine it ...
Since I have the SPORT with upgraded KIWI smoked LED tails, the positive wire from the LED cubes (used as reverse) was tied to the white cable on the kiwi tail light and the other one/ground was tied to the black wire, next to it.



i just soldered them in place, but this was a pic beforehand.

71595663_806681783067668_5802247761717886976_n.jpg
 

blnewt

Well-Known Member
First Name
Brad
Joined
Oct 8, 2018
Threads
96
Messages
9,876
Reaction score
23,795
Location
New Mexico
Vehicle(s)
2019 Jeep JL V6 SportS, (Retired 74 CJ-5, 80 CJ-7)
Occupation
Just ask @cosine he knows!
I just used a T-tap from the reverse driver wire on the drivers side harness (before the connector going to my LED tails) and ground it to the threaded hole on the underside of the bumper.
Sponsored

 
 



Top