Dogboyslim
Well-Known Member
- Thread starter
- #1
I had a minor wobble and a dented tie-rod, so I installed a synergy drag link and tie rod. I checked the torque with a torque wrench, straightened the wheel, and matched the old tie-rod measurement. I had just over 1/8” of toe in at the rotors.
test drive gave me violent wobble after going over a bump at 45 mph.
the drag link can easily be moved up/down, but it is the ends rotating, there is no movement at the threads. pinch bolts torqued to 90.
I’m frustrated and not sure what to do next. Any suggestions would be welcome!
test drive gave me violent wobble after going over a bump at 45 mph.
the drag link can easily be moved up/down, but it is the ends rotating, there is no movement at the threads. pinch bolts torqued to 90.
I’m frustrated and not sure what to do next. Any suggestions would be welcome!
Sponsored