Height between top of stock 33" tire and bottom of fenders on stock JLUR?

[junglemaster]

Can anyone tell me the height from the top of the tire to the bottom of the fender on your stock JLUR with 33" tires? Trying to figure out how much lift I got, how much rake i got? Cant find any reference points on this TIA!

Sponsored

 

[Lapis]

Stock JLUR with stock tires at about 40psi I have about 7(1/2)" from top of tire to bottom of fender front and back and about 23(1/2)" from center of the hub to bottom of the fender

 

[junglemaster]

Thanks for the measurement Lapis, is it the same for both front and rear wheels?

 

[SouthCo]

The second pic (which is the rear), the tape measure isn't on top of the tire like the first pic (which is the front). Looks like the wheel well gap is a little larger in the front...

 

[Roky]

Thanks for the measurement Lapis, is it the same for both front and rear wheels?

What does yours measure from top of front axle to bottom of upper coil housing. Stock Jlur with hardtop is 11-3/8”.

 

[junglemaster]

I just measured from the top of my 285/70/17 Falken Wildpeak MT on stock rubi wheels:

Left Front: 24.75" (Bottom of front fender to center of wheel cap), 9" from top of tire to bottom of fender

Right Front: 24.5" (Bottom of front fender to center of wheel cap), 8.4" from top of tire to bottom of fender

Left Rear: 24.5" (Bottom of rear fender to center of wheel cap), 8.75" from top of tire to bottom of fender

Right Rear: 24.6" (Bottom of rear fender to center of wheel cap), 8.4 from top of tire to bottom of fender

The rear is supposed to be lower than the front isnt it?

Does anyone know what the difference should be between front and rear fenders on the stock Rubi height with stock wheels/tires?

 

[dpike]

i'm heavily squatted from weight and was wondering is anyone know the ground to fender height (front and rear) of a JLUR ? i would like to 1.. see how much squat i have and 2 maybe level back to stock with a spacer kit.
tia.

Sponsored