Has anyone done a rubicon T case swap!?

[zeebo56]

When I was changing the settings with my tazer to 4.88, I noticed there was a separate setting for the tcase that you would change if you added a rubi t case.

Sponsored

 

[Jeep’n Jay]

Does anyone know if 68240441AB is the correct part number to swap into a sport automatic? There are so many terms throwin around, I am not sure what is the correct part number. Select trac, command, rock trac, etc. I just want a transfer case I manually control to put it in 2h, 4h, and 4l.

 

[fat_head]

Does anyone know if 68240441AB is the correct part number to swap into a sport automatic? There are so many terms throwin around, I am not sure what is the correct part number. Select trac, command, rock trac, etc. I just want a transfer case I manually control to put it in 2h, 4h, and 4l.

Yes, that is correct. 68240441AB or AC

 

[Jeep’n Jay]

Yes, that is correct. 68240441AB or AC

Awesome, thanks for the clarification. Think I’m going to pull the trigger

 

[yotajeeper]

Just picked up the T case!

 

[fat_head]

Just picked up the T case!

Is it brand new? It looks brand new.

 

[yotajeeper]

Is it brand new? It looks brand new.

Its from a 2019

 

[toothirtyj]

Is there any update on this project?

 

[yotajeeper]

Is there any update on this project?

Aamco did the install $300 labor .
the thing works like a charm!

 

[iboostgti335]

Where did you buy the t case from? How much if you don’t mind me asking? I’m interested in doing this swap also. I have a 3.6 Sahara

 

[yotajeeper]

Where did you buy the t case from? How much if you don’t mind me asking? I’m interested in doing this swap also. I have a 3.6 Sahara

I bought it from a trusted Junk yard!
jeep parts depot in SoCal
It cost me $1600

 

[blnewt]

I bought it from a trusted Junk yard!
jeep parts depot in SoCal
It cost me $1600

Diggin up an old thread, sry bout that
So I assume it was just plug & play, didn't need new driveshafts or any other adapters?
TIA

 

[yotajeeper]

Diggin up an old thread, sry bout that
So I assume it was just plug & play, didn't need new driveshafts or any other adapters?
TIA

Play and play. Only thing you have to do is use the Tazer to change the 4low settings

 

[JEEP4U]

Do yourself a favor............Great time to extend the vent hose on the transfer case.

 

[JLanesey]

I’ll be doing this swap at the same time as axles, I’ve found the t case anywhere from 13-1800 on car-part

Sponsored