voodoo11
Well-Known Member
- Joined
- Sep 11, 2018
- Threads
- 17
- Messages
- 160
- Reaction score
- 102
- Location
- New Jersey
- Vehicle(s)
- JL 2018 Rubicon
- Vehicle Showcase
- 1
which antenna are you running?So, I purchased the [Banned Site] CB Radio Bar. It's pricey, but really works well for my needs. I then tore up my A-pillar area and wired the AUX1 switch to the radios (A D71 and a Midland MXT400 GMRS) - note that you will have to suss things out your own way for power if you don't have the factory AUX switched installed.. I also fabricated my own hood mounts for the antennas, since nobody sells them (to my knowledge - maybe I should? ). Everything works great, although the D71 head unit its just a tad too close to my old eyes. I will likely fab a different mount later that moves it to the other side of the bar.
PS - I pulled the RG58 through just under the front windshield. It's tight, but I think it will get less noise than running it through the firewall holes.
Sponsored