Fuel Anza Wheels - wondering what the -6mm offset will look like

[JAC34]

I love these wheels but wondering what the -6mm offset will look like. I don’t want the wheels to stick out too much.

Any pics or recommendations on a -6 offset with an AEV 2.5” lift?

Sponsored

 

[JL MADDOG]

Wheel Offset Visualizer & Calculator

 

[Hucke_250]

Are the fuel anza you looking at 17x8.5 -6? What size tire are you planning on running?

 

[JAC34]

Are the fuel anza you looking at 17x8.5 -6? What size tire are you planning on running?

yes with 35 x 12.5 x17

 

[Hucke_250]

yes with 35 x 12.5 x17

I am running 20x9 + 1 Fuel Rebel 5 wheels with 35x12.5x20. I compared my setup to yours and your setup will extend 1mm further than mine. Here are some pics of my setup.

 

[Steph1]

With an 8.5 inch wheel, -6 offset means 4.5 inch of backspacing. Right there, your wheel would stick out by 1.75 inch more than in stock form. Add to that the inch more of width and wider tire and the tires are Way way passed the fenders. I wouldn’t run such a set-up myself.

with an 8.5 inch wheel width , if tire poke is a concern, which is my case,+18mm offset is the least I would go. The tire tread would stick out by about 1/4 to a half inch passed the fenders.

Sponsored