Sponsored

Fire result of transmission failure

Ericshere03

Active Member
First Name
Eric
Joined
Jan 3, 2020
Threads
3
Messages
26
Reaction score
10
Location
Feenicks
Vehicle(s)
2020 Gladiator 6 Speed
Look at the pics of a good replacement setup here:

/www.centerforce.com/
I meant a stock flywheel, Pressure plate, clutch disk and throwout bearing... But the replacement certerforce looks good, the flywheel looks to have a lot of inertia, nice for blipping over obstacles and easy starting off the line.
Sponsored

 

WelderJay

Active Member
First Name
Jason
Joined
Jul 10, 2019
Threads
8
Messages
43
Reaction score
9
Location
California
Vehicle(s)
2018 JLUS
Well this sucks. I really don't want to share this with my wife. I talked her into the MT because "It's a Jeep and that Auto is too new, I don't want to buy the first ones and have an issue." I can hear it now- "how's that Mt working out for ya"
 

four low

Well-Known Member
Joined
Feb 1, 2017
Threads
13
Messages
3,112
Reaction score
3,670
Location
central New York
Vehicle(s)
2018 JL
That flywheel alone is worth the upgrade. Dual Mass Flywheels can be problematic, your kit should be a big improvement over stock.
 

Sponsored

Ericshere03

Active Member
First Name
Eric
Joined
Jan 3, 2020
Threads
3
Messages
26
Reaction score
10
Location
Feenicks
Vehicle(s)
2020 Gladiator 6 Speed
Just got my centerforce in. I'm going in blind not sure what to expect, let you know what i run into.

20200402_152924.jpg
20200402_153109.jpg
20200402_153109.jpg
Had their dual friction clutch in an old Datsun 240z. Good stuff ... let us know what you think!

are you going to have the dealer install those parts when they do the recall ?
 

vavaroutsos

Well-Known Member
First Name
Pete
Joined
Nov 24, 2017
Threads
9
Messages
621
Reaction score
413
Location
Scotts Valley, CA
Vehicle(s)
2015 Sprinter Crew Van 2500 High Roof 144" WB OM651 Brilliant Silver, 2019 JLR 3.6L 6SPD Granite Crystal
Just got my centerforce in. I'm going in blind not sure what to expect, let you know what i run into.

20200402_152924.jpg
20200402_153109.jpg
20200402_153109.jpg
Where's the throw out bearing? Does Centerforce offer a complete kit and a clutch only kit?
 

ALRUI

Well-Known Member
First Name
Arnold
Joined
May 18, 2018
Threads
19
Messages
697
Reaction score
298
Location
Murphy, NC
Vehicle(s)
2018 JLU Sahara, 2003 F150 S-Crew FX4, Others
Well this sucks. I really don't want to share this with my wife. I talked her into the MT because "It's a Jeep and that Auto is too new, I don't want to buy the first ones and have an issue." I can hear it now- "how's that Mt working out for ya"
I hear ya, I had to go round & round with my wife on this (I gave in on the F150 & want going to do it again). I heard all the concerns and finally she agreed on the manual & on the LSD & now both apparently have major issues! I thought I was doing us both a fave or BOOM!
 

ALRUI

Well-Known Member
First Name
Arnold
Joined
May 18, 2018
Threads
19
Messages
697
Reaction score
298
Location
Murphy, NC
Vehicle(s)
2018 JLU Sahara, 2003 F150 S-Crew FX4, Others
Just got my centerforce in. I'm going in blind not sure what to expect, let you know what i run into.

20200402_152924.jpg
20200402_153109.jpg
20200402_153109.jpg
You plan on doing any kind of YouTube video on the install? That would be AWESOME!
 

ALRUI

Well-Known Member
First Name
Arnold
Joined
May 18, 2018
Threads
19
Messages
697
Reaction score
298
Location
Murphy, NC
Vehicle(s)
2018 JLU Sahara, 2003 F150 S-Crew FX4, Others
That flywheel alone is worth the upgrade. Dual Mass Flywheels can be problematic, your kit should be a big improvement over stock.
What exactly is meant by dual mass? Is it made out of two different materials that are bonded together?
 

Sponsored

Toycrusher

Well-Known Member
Joined
Oct 2, 2019
Threads
19
Messages
1,412
Reaction score
2,070
Location
Texas
Vehicle(s)
JLUR
So only got a couple hours in today. Dropped shafts and y-pipe. Jeep does use a pretty impressive thread lock on the shafts. My M12 impact couldn't do it all, had to break out the M28 for a few fasteners.

The kit does include a throw out bearing
 

D60

Well-Known Member
Joined
Apr 1, 2019
Threads
39
Messages
1,615
Reaction score
1,827
Location
CO
Vehicle(s)
JL
So only got a couple hours in today. Dropped shafts and y-pipe. Jeep does use a pretty impressive thread lock on the shafts. My M12 impact couldn't do it all, had to break out the M28 for a few fasteners.

The kit does include a throw out bearing
Are you really still running M28 stuff, or was that a typo and shoulda been M18? I love M28 but Milwaukee has virtually walked away from it in the domestic market.
 
 



Top