Fender flare extensions?

[Aramis76]

Hello all,

I'm going with 35" on my Rubicon and the wheels I've selected have a +12 offset which is going to push the tires out a bit.

I'm a bit worried about getting in trouble with the local police so i figured i'd look at fender flare extensions in case this becomes a problem.

I see that they exist for the JK but I can only find one company making them for the JL and they are in Australia.

Has anyone come across such a thing?

I understand it may not be for everyone's taste, but I wish to keep the oem fenders and not worry everytime a cop is nearby.

Thanks!

Picture for reference:

Sponsored

 

[BillJeep]

Hey, just checking @Aramis76 did you find anything? I am going through the same thing right now just to pass Pennsylvania inspection.

 

[ExitLeft]

Hello all,

I'm going with 35" on my Rubicon and the wheels I've selected have a +12 offset which is going to push the tires out a bit.

I'm a bit worried about getting in trouble with the local police so i figured i'd look at fender flare extensions in case this becomes a problem.

I see that they exist for the JK but I can only find one company making them for the JL and they are in Australia.

Has anyone come across such a thing?

I understand it may not be for everyone's taste, but I wish to keep the oem fenders and not worry everytime a cop is nearby.

Thanks!

Picture for reference:

What’s the name of the Aussie company making them?

 

[De-Troy]

That's the link to the company although they mention that they will not fit US Spec as we get different shaped flares in Australia

https://www.doubleblackoffroad.com/jeep-wrangler-parts/DBOR-2--Fender-Extensions-For-JL.aspx

 

[ExitLeft]

That's the link to the company although they mention that they will not fit US Spec as we get different shaped flares in Australia

https://www.doubleblackoffroad.com/jeep-wrangler-parts/DBOR-2--Fender-Extensions-For-JL.aspx

Thanks for the link. Too bad they don’t fit, but even if they did....damn! that’s a pretty penny. $835 AUD. that’s close to $600 USD.

 

[BadAssBumbleBee]

Thanks for the link. Too bad they don’t fit, but even if they did....damn! that’s a pretty penny. $835 AUD. that’s close to $600 USD.

Don't forget to factor in the cost of shipping from Australia to the USA.......might just be cheaper to deal with a ticket or three!

 

[mwilk012]

Have you considered leaving your communist dictatorship?

 

[De-Troy]

Thanks for the link. Too bad they don’t fit, but even if they did....damn! that’s a pretty penny. $835 AUD. that’s close to $600 USD.

Yeah the are Stupidly Expensive I guess that's what happens when you have the market cornered with a single product plus the Law in Australia love wheel poke!!!

 

[bigfoot21075]

Was hoping this company would offer this for US Spec by now....

 

[Roobi4X4]

Was hoping this company would offer this for US Spec by now....

now available US spec.

https://doubleblackoffroad.com/prod...ed-feder-kit?_pos=4&_psq=dbor jl&_ss=e&_v=1.0

 

[rent]

The Xtreme Recon upgrades will be out soon (later this month, hopefully). There will be an official Mopar part for the fender extensions.

 

[Clomper87]

The Xtreme Recon upgrades will be out soon (later this month, hopefully). There will be an official Mopar part for the fender extensions.

Have you been able to find the part number? I haven’t had any luck

 

[Chile1]

Here are the Mopar XR Fender Flare Extension parts numbers:

68536652AA
68536653AA
68536654AA
68536655AA

The fronts (52/53) are $19ish each and rears (54/55) are $17ish each

 

[RELBUS]

Has anyone removed these yet from their XR? If so assume it’s as simple as drill out, remove extensions, replace rivets?
I don’t like the look and intend to remove ASAP once my ordered Jeep arrives.

 

[Gnomad]

Has anyone removed these yet from their XR? If so assume it’s as simple as drill out, remove extensions, replace rivets?
I don’t like the look and intend to remove ASAP once my ordered Jeep arrives.

I drilled mine out last night with a 1/4 bit. Took 10 minutes…easy.

Sponsored