Falken Wildpeak AT3 285/70R17

[BeachBum72]

Hi All- I replaced the stock Mud Terrain KM2s with Falken Wildpeak AT3s 285/70R17. I’m happy so far, but I only have a few miles on them.

Couple things....

The spare is pressing on the brake light support. Are there any options besides a relocation bracket? Maybe some sort of spacer behind the wheel?

Also, the tires are set at 37psi cold. Should I come down some given how the wear looks in the picture? The outside tread doesn’t seem to be making much contact.

Thanks for any suggestions.

Sponsored

 

[Thashef]

I am running the same tires on my Sahara (no lift). I run them at 34, I find it smoothes out the ride a lot.

I had no issues with the spare with my setup.

 

[American Adventurist]

I have these in 35’s, I run about 34 PSI and it’s fine

 

[BeachBum72]

Thanks guys. I’ll give 34 PSI a try.

Maybe the stock wheel offset is causing the spare to press on the light support.

 

[Matt2036]

I have the same tires and I love them! Are usually keep them between 36 and 37 and the ride is very good.

Sponsored