Aintsfan25
Active Member
- First Name
- David
- Joined
- Apr 22, 2020
- Threads
- 3
- Messages
- 36
- Reaction score
- 23
- Location
- Lincoln, Alabama
- Vehicle(s)
- 2020 Jeep Wrangler JL
- Occupation
- Auto assembly
- Thread starter
- #1
I have a 2dr sport JL stock as can be. I just bought a JLUR Ecodiesel suspension. It had a hardtop but not the steel bumpers.
I have done as much research as I can in these forums but there just isn't a ton of data on the Ecodiesel suspension in here (atleast from my digging)
Everything i have read leads me to believe the coils should have separate part numbers for front and rear, driver and passenger. Mine don't.
Front part numbers are 3667AD and I measured them at 19" a piece
Rear part numbers are 3601AA and I measured at 14 5/8"
The only difference between them is Load ID and one of each spring has a green tag
From what I have read this opens up many questions. This is my first time dealing with a suspension swap. I do work in the automotive industry but all my knowledge is in electrical harnesses and the interior of a vehicle.
I'm a little lost when it comes to this but any thoughts or tips on installation would be a massive help. I also have ordered the mopar lcas because I assume this will be on the larger side of the Rubi lift heights.
[GALLERY=][/GALLERY]
Sponsored