Easy fridge slide system.

[ROK HEMI]

I have a 2022 wrangler with the trail rail system back in the cargo area. I received a DFG cooler slide for my 45 quart Engle refrigerator for Christmas. I have installed it on the driver side, rear cargo area, using T nuts in the trail rail track. This system only allows me to bolt down the left side of the slide. I am wondering if I can install a nutcert through the carpet on the right side of the refrigerator slide? I do not want some thing like a piece of plywood, but would consider removing the trail rail system and carpeting for a modular floor system that would allow me to bolt down the fridge slide. I do not intend to do over landing with this vehicle, and will never have a storage system installed. I will take day trips and would like to have an electric cooler and often pack a few chairs and other supplies in the back.

Appreciate any thoughts on how I might be able to bolt the refrigerator slide in as is, or if there is a semi affordable decking system, that might work.

Sponsored

 

[ROK HEMI]

got it working. Used three of the trail rail anchor points and 3 weld nuts under the rigid rear cargo platform. The Engle MR040 I have slides in and out nicely with rear seats up.