Dynatrac EnduroSport 2" lift - also fixed my steering issues!

[Hayseed_JLUR]

4WP said if I get this lift I would also need the "JL Front Pin".

1 S/P 82375 JL FRONT PIN

Did anyone else get this as part of the lift?

Like Irishtim said - no need. Do not need trackbars, control arms - nothing.

Sponsored

 

[Hayseed_JLUR]

You leaning at all?

Do not think so. Not going to check because if I am, it will drive me nuts.

Just put the 35" tires on this morning. Rides perfect in my opinion.

 

[balan]

Like Irishtim said - no need. Do not need trackbars, control arms - nothing.

Honestly I'm not sure what it is either. I asked about it and the explaination was:

"The front pin is a set of alignment cams. On kits that don’t come with lower control arms they are necessary to get the alignment in spec. "

 

[Hayseed_JLUR]

 

[Jvillz]

Really appreciate this thread. After all the energy spent researching, I’m waiting for this lift to arrive. Going with 35’s and 17 wheels. It seems after reading this thread among others, the need for 1/2 inch front coil spacers were split 50/50. That’s the only thing bugging me atm. I’m running a vr10s winch, grill bar and mounting plate plus the stock steel bumper on jlu rubicon. Any final suggestions on the spacer?

 

[Hayseed_JLUR]

Hard to tell from my pic but no spacer and sits just fine. Have same set up as you on winch and bumper except my winch is the heavier zeon 10s.

 

[Jvillz]

Hard to tell from my pic but no spacer and sits just fine. Have same set up as you on winch and bumper except my winch is the heavier zeon 10s.

Awesome, I read your measurements earlier and will just roll with it for now. Definitely want the lift as close to 2 inches as possible but no more. We have the exact same rubi . It did seem that most who put the spacers on were either running a heavier bumper, 37’s and/or 2 doors.

 

[Hayseed_JLUR]

Also keep in mind if you put spacers in it to make it level now, once you put people or gear in back or tow a trailer, you will run the risk of making it rake rearward. Which you do not want ever.

 

[Chocolate Thunder]

You don’t absolutely NEED a spacer in the front. If you install it without spacers and later decide you want it, it’s not difficult to install them after the lift is already installed.

 

[Gravitythief76]

Anyone got pics of this lift with 37” ko2s preferably on a jlur?

 

[vhfan5150]

Well you all just cost me $1234. Gee thanks! Can’t wait to get it installed. I had to balance getting 35s and not rubbing at full flex with keeping the height ok for the wife and kiddos. Was going to just go with spacers but she hinted that I would be ok getting a suspension lift, so I jumped before she changes her mind.

 

[RenoMD]

Well you all just cost me $1234. Gee thanks! Can’t wait to get it installed. I had to balance getting 35s and not rubbing at full flex with keeping the height ok for the wife and kiddos. Was going to just go with spacers but she hinted that I would be ok getting a suspension lift, so I jumped before she changes her mind.

You will absolutely love this lift

 

[MyJlU]

So I love this lift just not the price tag

 

[Mojito St Pete]

Just ordered mine today. Went back and forth between teraflex, mopar, rancho and dynatrac. 2019 JLUR on 35x12.5x20

 

[Jvillz]

Love this lift!

Sponsored