Dynatrac EnduroSport 2" lift - also fixed my steering issues!

[McCoys]

I went with the Teraflex 1/2" spacer in the front with OEM steel bumper + winch + winch plate and it sits nicely like that.

What winch did you get? I'm thinking of saving weight and going with synthetic 9,500lb

Just trying to do the weight calculations right now based on your items listed.

I have a 150lb ARB Deluxe Front bumper that already comes with a winch plate. If i add a winch, i'll be in around 230lbs

Sponsored

 

[McCoys]

May I request some sport sahara pictures before and after?

 

[EngenZerO]

May I request some sport sahara pictures before and after?

Not the greatest pictures but here it is on a Moab which is based on the Sahara platform. I am also running BFG KO2 285/70/17 on Method 702.

 

[Llkindt]

Maybe I'm just tired from work but if this kit lifts a Rubicon 2 inches wouldn't it lift a Sahara or Sport closer to 3 to 3.5 inches since they do not offer model specific kits? I'm really concidering Dynatrac but would like to know how much lift I would actually get on a Sahara or Sport.

 

[EngenZerO]

Maybe I'm just tired from work but if this kit lifts a Rubicon 2 inches wouldn't it lift a Sahara or Sport closer to 3 to 3.5 inches since they do not offer model specific kits? I'm really concidering Dynatrac but would like to know how much lift I would actually get on a Sahara or Sport.

I actually never measured the difference. But the two top photos above are stock stance on my Moab on 255/75/17 KM2. Two bottom are post Dynatrac.

 

[McCoys]

Not the greatest pictures but here it is on a Moab which is based on the Sahara platform. I am also running BFG KO2 285/70/17 on Method 702.

thank you for the pictures. I think i’ve decided to go for the dynatrac over the ARB

 

[eck]

What winch did you get? I'm thinking of saving weight and going with synthetic 9,500lb

Just trying to do the weight calculations right now based on your items listed.

I have a 150lb ARB Deluxe Front bumper that already comes with a winch plate. If i add a winch, i'll be in around 230lbs

Smittybilt X2O 10k with synthetic line, which I believe is 67 lbs.

Here's how it sits with the spacers in the front:

 

[McCoys]

Smittybilt X2O 10k with synthetic line, which I believe is 67 lbs.

Here's how it sits with the spacers in the front:

did you add a half inch leveling spacer in the front?

 

[eck]

did you add a half inch leveling spacer in the front?

Yes, these exact ones:

https://www.amazon.com/gp/product/B07H16FPHC/

 

[vhfan5150]

Went up higher than I thought it would...

 

[Llkindt]

Has anyone added a 3/4 inch spare to this lift, front and back? I'm thinking that would help with any rubbing with 35 tires on a sport s jlu. Only thing I'm concerned with is throwing off the geometry to much. Should add I'm adding front and rear adjustable track bars with rear bracket and front geometry correction brackets if I go with the coil spacers.

 

[401nate]

Not the greatest pictures but here it is on a Moab which is based on the Sahara platform. I am also running BFG KO2 285/70/17 on Method 702.

looks great man! Tires look more like 285/75r17 (35”) than 33”. Did you mean to put 75 instead of 70? I like the gap you have with the non-high rise fenders and the Dynatrac but I would like to have that gap with 35’s

 

[EngenZerO]

looks great man! Tires look more like 285/75r17 (35”) than 33”. Did you mean to put 75 instead of 70? I like the gap you have with the non-high rise fenders and the Dynatrac but I would like to have that gap with 35’s

Nah, those are the stock rubicon tires the dealer gave me for free. Figured no need to jump to 35s with a free set handed to me.

Here is another crappy photo of the side. I parked in the center of the garage and ran into my storage rack. I can grab a better picture tomorrow.

 

[401nate]

Nah, those are the stock rubicon tires the dealer gave me for free. Figured no need to jump to 35s with a free set handed to me.

Here is another crappy photo of the side. I parked in the center of the garage and ran into my storage rack. I can grab a better picture tomorrow.

It looks great! If you have afew minutes tomorrow could you measure the gap between the tire and the fender? And the Height from floor to roofline? Trying to better gauge it with 35’s and total height. Thanks man!

 

[Wa-stinggray]

Anyone have this lift and taken it off-road while loaded? Wondering how it does with weight. More into overlanding stuff and with full family gear,rtt and steel bumpers.... I’m hefty. Looked at Aev but I don’t want a 4” lift personally.

Sponsored