Durotrak front and rear trackbar

[Mikehikespnw]

Hello does the front or rear trackbar still require modifications to the jeep? I keep seeing that people had to drill or grind to make the front trackbar work on their JL

Sponsored

 

[GATORB8]

There's an existing hole on the bottom of the TB axle mount that needs to be enlarged. It's been about a year since I installed mine, but it was still necessary then.

 

[CloakedWillys]

Thank you for asking. We do still require opening up the hole in the bottom of the front track bar mount to allow our joint to clear.

 

[Mikehikespnw]

Thank you much for your quick replies!!

 

[mrtm1970]

Is this ONLY pertain to the Durotrac or ALL (I got the RC one)? I have looked for any install posts and video and have found nothing regarding the JLU/JL.

 

[GATORB8]

Is this ONLY pertain to the Durotrac or ALL (I got the RC one)? I have looked for any install posts and video and have found nothing regarding the JLU/JL.

There may be others, but this post is specifically MC because they use a larger rod end/bushing compared to stock. The RC one is bolt on.

Sponsored