1996cc
Well-Known Member
- Thread starter
- #1
I used the grommet based on some threads I found here. Now at least 1 of my AUX switches doesn’t work anymore. After wiring in my Search & Rescue radio, I lost my lights wired to the AUX 2 switch. I decided to stick my camera scope inside the grommet to take a peak. I assumed that the factory would pass the wires straight through, even wrapped in the fabric tape they have on the outside - that IS NOT the case. It is like spaghetti in there!! Now I’m pretty sure that I cut a wire (hopefully only 1) while poking through it with a sharp screwdriver
Here is the grommet with my coax and power/ground wires going through:
And inside the grommet:
I hope this saves someone else from this problem. This is going to be a nightmare to try and fix! I’m open to any suggestions.
Here is the grommet with my coax and power/ground wires going through:
And inside the grommet:
I hope this saves someone else from this problem. This is going to be a nightmare to try and fix! I’m open to any suggestions.
Sponsored