DIY limb riser from marine supplies store parts (pics)

[CapitanBlack]

I've made a cheap limb riser out of few S/S parts from a marine supplies store. Requires drilling of 8 small holes for screws attaching the two large S/S part. All parts costed me ~50 USD in Vancouver, B.C. but I'm sure you can get them cheaper online. So far I've done a few off-road trips - it works very well. No extra whistling noise on highways too.

https://photos.app.goo.gl/mN399e5ce8dtzkwr6

Sponsored

 

[Karl_in_Chicago]

I've made a cheap limb riser out of few S/S parts from a marine supplies store. Requires drilling of 8 small holes in for attaching the large S/S part. All parts costed me ~50 USD in Vancouver, B.C. but I'm sure you can get them cheaper online. I've done a few off-road trips since then - it works very well. No extra whistling noise on highways too.

https://photos.app.goo.gl/1K5n9dJYattsPBPA8

And today I learned what a limb riser is! Thanks (cool work, too).

 

[CapitanBlack]

And today I learned what a limb riser is! Thanks (cool work, too).

Sorry, bud - here is the correct link with more photos

https://photos.app.goo.gl/mN399e5ce8dtzkwr6

 

[Karl_in_Chicago]

Sorry, bud - here is the correct link with more photos

https://photos.app.goo.gl/mN399e5ce8dtzkwr6

Ahh, even better - thanks!

 

[Glamisfan]

I’ve seen these in pictures before but could not figure out what the hell they were? Now I know! Thanks!

Sponsored