Daystar leveling spacer on a rough country bb lift???

JlChris

Active Member
First Name
Chris
Joined
Aug 11, 2019
Messages
35
Reaction score
48
Location
California
Vehicle(s)
2018 JLU SPORT
Hey everyone, I have a 2.5” spacer lift on my jl sport and after adding a front bumper and winch I’ve noticed some sagging. Does anyone have any experience running a 3/4” puck on a rough country spacer lift? Will it work to level the jeep out or is it even safe?
 

Stuckinthesand

Well-Known Member
First Name
CJ
Joined
Apr 6, 2020
Messages
417
Reaction score
332
Location
NJ
Vehicle(s)
2019 Wrangler sport s 2017 GMC Acadia
I think I’ve heard of other forum members do this but just remember that the front on the RC is 2.5” and the rear is 2” so 3/4 on the front might take it up to high. I’m surprised you have enough sag to need another spacer. I have the same kit with a steel bumper and winch and I have minimal sag.
 
OP
OP
JlChris

JlChris

Active Member
First Name
Chris
Joined
Aug 11, 2019
Messages
35
Reaction score
48
Location
California
Vehicle(s)
2018 JLU SPORT
I don’t know why I have so much sag in the front. After measuring from center hub to bottom of fender, my front end sits almost 2 inches lower than the back. Maybe the cavfab bumper and x2o winch are just a heavy combo?
 
Advertisement

WheelsASAP
 
Advertisement
Top