BCMgunner
Well-Known Member
- Thread starter
- #1
Ordered 11/19
Delivered 04/13
As you guys know, these come with most options standard. Options ordered include Mopar Roof liner, Mopar plastic mats, Mopar rear gate hinge reinforcements, forward facing camera.
Inspiration for the build is the 392 concept vehicles which featured Crystal Granite, 37’s, the original Mopar beadlocks with matte black rims, Mopar oversized tire carrier, and ARB diff covers in black and appeared to be lifted more than the production versions.
Exterior mods:
1) Mopar Performance Rock Rails
2) Mopar oversized spare tire carrier
3) Mopar Beadlocks with 4.4” BS. Ring powder coated “fine texture black”
4) Teraflex 2 Door JL spacer kit with extended bump stops + 0.5” Teraflex spacer up front. This allowed for an even 1.5” lift front and back
5) Front and rear sway bar end links from Mopar 2” lift kit
6) 37x12.5x17 BFG KO2s (lightest and quietest tire I still trusted in sharp rocks of Central Texas and mixed terrain of Moab).
7) ARB front and rear differential covers
8) MetalCloak rear differential skid
9) Mopar wheel locks x5
10) Mopar locking gas cap (updated version that uses your existing key)
11) Debadged “Jeep” and “Unlimited”
12) Black, shorter antenna
Interior mods:
1) Snellax seat ventilation cover with additional 1” foam insert. Probably my favorite mod as it brought the back of the seat in-line with the head rest which was far to forward and uncomfortable/annoying. Seat very comfortable now and more functional for hot weather.
2) 1/4” Foam tape mod for freedom panels. Noticeably less wind noise and now roof doesn’t leak when in touchless drive through car wash.
3) Hot Heads OEM roof liner completion kit
4) Ceramic tint front two windows to match factory tint and tint on front windshield. All the above are needed for central Texas summers.
5) Mopar stainless steel door sill inserts and stainless steel brake/gas pedals
6) Mopar Jack base extension
7) Tazer JL Lite for tire size recalibration. Total a*sho*le to physically install. Had to remove lower dash panel.
8) Debadge yellow safety stickers on visors
9) Screen protector sourced on Amazon
10) Armrest organizer tray, Amazon
11) 67 Designs drivers side universal phone mount
Mods incoming this week:
1) Rubicon Express shock extensions
2) LCAs from Mopar 2” lift kit
Future mods:
1) ARB portable single air compressor
2) Rigid SAE fog lights in white
3) FAD skid? - MetalCloak?
4) Sunrider Freedom Panal replacement
Now for pictures:
Delivered 04/13
As you guys know, these come with most options standard. Options ordered include Mopar Roof liner, Mopar plastic mats, Mopar rear gate hinge reinforcements, forward facing camera.
Inspiration for the build is the 392 concept vehicles which featured Crystal Granite, 37’s, the original Mopar beadlocks with matte black rims, Mopar oversized tire carrier, and ARB diff covers in black and appeared to be lifted more than the production versions.
Exterior mods:
1) Mopar Performance Rock Rails
2) Mopar oversized spare tire carrier
3) Mopar Beadlocks with 4.4” BS. Ring powder coated “fine texture black”
4) Teraflex 2 Door JL spacer kit with extended bump stops + 0.5” Teraflex spacer up front. This allowed for an even 1.5” lift front and back
5) Front and rear sway bar end links from Mopar 2” lift kit
6) 37x12.5x17 BFG KO2s (lightest and quietest tire I still trusted in sharp rocks of Central Texas and mixed terrain of Moab).
7) ARB front and rear differential covers
8) MetalCloak rear differential skid
9) Mopar wheel locks x5
10) Mopar locking gas cap (updated version that uses your existing key)
11) Debadged “Jeep” and “Unlimited”
12) Black, shorter antenna
Interior mods:
1) Snellax seat ventilation cover with additional 1” foam insert. Probably my favorite mod as it brought the back of the seat in-line with the head rest which was far to forward and uncomfortable/annoying. Seat very comfortable now and more functional for hot weather.
2) 1/4” Foam tape mod for freedom panels. Noticeably less wind noise and now roof doesn’t leak when in touchless drive through car wash.
3) Hot Heads OEM roof liner completion kit
4) Ceramic tint front two windows to match factory tint and tint on front windshield. All the above are needed for central Texas summers.
5) Mopar stainless steel door sill inserts and stainless steel brake/gas pedals
6) Mopar Jack base extension
7) Tazer JL Lite for tire size recalibration. Total a*sho*le to physically install. Had to remove lower dash panel.
8) Debadge yellow safety stickers on visors
9) Screen protector sourced on Amazon
10) Armrest organizer tray, Amazon
11) 67 Designs drivers side universal phone mount
Mods incoming this week:
1) Rubicon Express shock extensions
2) LCAs from Mopar 2” lift kit
Future mods:
1) ARB portable single air compressor
2) Rigid SAE fog lights in white
3) FAD skid? - MetalCloak?
4) Sunrider Freedom Panal replacement
Now for pictures:
Sponsored
Last edited: