Control Arm Help

Brettboy

Member
First Name
Brett
Joined
May 19, 2020
Messages
16
Reaction score
117
Location
Nashville
Vehicle(s)
2018 JLU 4 Door Sport
I noticed while cleaning the Jeep that my passenger side control arm bushing had completely worn and split. I bought this Jeep after it was already lifted and was told it was a 2 inch lift (can’t determine which lift was put on).

My question is should I just replace the bushing or buy new control arms? I’m pretty handy and could swap them out easily. If I do replace them, what brand and what length do I get? Thanks for any help you guys can provide.

Attached is a photo of the bushing.
D1164368-3678-48BD-A1A2-E1AC8AF8EDF6.jpeg





Advertisement

 
OP

Brettboy

Member
First Name
Brett
Joined
May 19, 2020
Messages
16
Reaction score
117
Location
Nashville
Vehicle(s)
2018 JLU 4 Door Sport
  • Thread starter
  • Thread Starter
  • #3
Thank you for the info. Next question. Are there different sway bar links and if so, what are your recommendations?
 

Billy goat

Well-Known Member
First Name
Mark
Joined
Sep 11, 2018
Messages
472
Reaction score
718
Location
Phoenix
Vehicle(s)
Jl sport. Ford Focus st
Vehicle Showcase
1
Thank you for the info. Next question. Are there different sway bar links and if so, what are your recommendations?
Depending on your lift height you might want extended or adjustable links. There are several options out there. Try to figure out what brand of lift you have and see if they have an offering.
 

Advertisement




Allmoparparts.com
 



Advertisement
Top