Loki Kai
Well-Known Member
- First Name
- John
- Joined
- Aug 22, 2019
- Threads
- 12
- Messages
- 245
- Reaction score
- 264
- Location
- Wild Wonderful
- Vehicle(s)
- 2018 JL Rubicon
- Thread starter
- #1
Apologies in advance for this DETAILED post but...I have for sale a combination spare tire spacer, license plate, and camera relocation set up that I have pieced together. When I moved up to 37x13.50r17 it required spacing and I only had a few days before a planned trip. I had a JK spare tire spacer on hand and so it began.
I removed "CUT" the camera housing so the JK spacer could be used and replaced the JK lugs with correct JL. I had planned to relocate the camera and plate eventually anyway. I later decided I could MODIFY a Rugged Ridge plate relocation kit for mounting the backup camera by boring a hole and fabing up a mounting system using original factory parts and some hardware store items. I also added a Poison Spyder plate and 3rd brake light kit to be legal. After a LOT of work, fitting, and adjusting I ended up with what you see. It WORKS great and have used it a few months. I am selling it ONLY because my wonderful wife had purchased a Motobilt kit and had it powder coated as a Christmas gift. Long story LONGER....my handy work is now for sale NOT including Poison Spyder light kit. Here is what you get:
Spare tire Spacer Mount with correct JL lugs.
Rugged Ridge plate relocation kit MODIFIED for camera mount.
Factory camera housing MODIFIED with all hardware needed for mounting.
You will need to figure out the correct rubber tire spacers "bumpers" for your spare tire size.
I will answer any questions and talk buyer through the install process since there are obviously NO written directions for this.
Here are several photos of the components and of if installed. (First few are STOCK photos of unmodified kit)
$100.00 you pay shipping.
I removed "CUT" the camera housing so the JK spacer could be used and replaced the JK lugs with correct JL. I had planned to relocate the camera and plate eventually anyway. I later decided I could MODIFY a Rugged Ridge plate relocation kit for mounting the backup camera by boring a hole and fabing up a mounting system using original factory parts and some hardware store items. I also added a Poison Spyder plate and 3rd brake light kit to be legal. After a LOT of work, fitting, and adjusting I ended up with what you see. It WORKS great and have used it a few months. I am selling it ONLY because my wonderful wife had purchased a Motobilt kit and had it powder coated as a Christmas gift. Long story LONGER....my handy work is now for sale NOT including Poison Spyder light kit. Here is what you get:
Spare tire Spacer Mount with correct JL lugs.
Rugged Ridge plate relocation kit MODIFIED for camera mount.
Factory camera housing MODIFIED with all hardware needed for mounting.
You will need to figure out the correct rubber tire spacers "bumpers" for your spare tire size.
I will answer any questions and talk buyer through the install process since there are obviously NO written directions for this.
Here are several photos of the components and of if installed. (First few are STOCK photos of unmodified kit)
$100.00 you pay shipping.
Sponsored
Last edited: