Krondor
Well-Known Member
- Thread starter
- #151
Tailgate Reinforcement Installed!
The install was easier than anticipated and it looked easy enough to begin with.
Taped to ensure alignment, and carefully or not the bolts come out a bit chipped. Never to be the same, I'm sure no one will notice but me.
Before torquing any of the bolts they were all hand tightened and then the alignment was checked to make sure it was even on both sides.
All tightened down to the specified 35 ft-lbs on the main bolts and 13 ft-lbs on the carrier bolts. Now I can wheel with a bit less worry.
The install was easier than anticipated and it looked easy enough to begin with.
Taped to ensure alignment, and carefully or not the bolts come out a bit chipped. Never to be the same, I'm sure no one will notice but me.
Before torquing any of the bolts they were all hand tightened and then the alignment was checked to make sure it was even on both sides.
All tightened down to the specified 35 ft-lbs on the main bolts and 13 ft-lbs on the carrier bolts. Now I can wheel with a bit less worry.
Sponsored
Last edited: