Robs JL
Well-Known Member
- Joined
- Apr 26, 2019
- Threads
- 21
- Messages
- 179
- Reaction score
- 84
- Location
- los Angeles, CA
- Vehicle(s)
- 2018 JL Sahara
- Thread starter
- #1
I posted this on the lighting section but I'll try here also because I can't get a hold of anybody at CJ. What's with customer service these days.
Looking into purchasing the micro fuse tap in the link below. My question is I'll be tapping into the F52 and using the existing 20 amp fuse that's already there in the secondary slot but the fuse that comes with the wiring is only 15 amp. Is there an issue or do I need to change the 15 amp into 20. Fuse is only to power the DRL.
https://www.amazon.com/gp/product/B077PBXGKQ/ref=ox_sc_act_title_1?smid=A27SH1J43RWZI1&psc=1
Another way they installed it is through the headlight harness. I put the link below. Start video at 2:45. Has anyone tried it this way and isn't a ground wire needed.
Looking into purchasing the micro fuse tap in the link below. My question is I'll be tapping into the F52 and using the existing 20 amp fuse that's already there in the secondary slot but the fuse that comes with the wiring is only 15 amp. Is there an issue or do I need to change the 15 amp into 20. Fuse is only to power the DRL.
https://www.amazon.com/gp/product/B077PBXGKQ/ref=ox_sc_act_title_1?smid=A27SH1J43RWZI1&psc=1
Another way they installed it is through the headlight harness. I put the link below. Start video at 2:45. Has anyone tried it this way and isn't a ground wire needed.
Sponsored
