HarleysNGuns
Well-Known Member
- Thread starter
- #1
My JLUR is on the rail and should be delivered in a week. I requested the dealer not wash the car as I have seen how that turns out even on a new car. I wanted them to even leave the plastic on but was told they needed to remove it to inspect upon delivery. I plan on using Cquartz UK 3.0 to ceramic coat and here are my steps I will be following. Let me know if anyone has any experience, tips, or suggestions about my process. Has anyone applied Cquartz to black fenders and roof? I see CarPro says its fine for plastics just wanted to see if people have experience. I of course will post photos once complete.
1. Wash with CarPro Reset
2. Decontaminate with Iron-X
3. Clay with Nanoskin fine grade and Immolube
4. Polish with CarPro Essence
5. Clean with CarPro Eraser
6. Apply Cquartz UK 3.0 (two coats)
7. Finish up with CarPro Reload for some extra gloss
1. Wash with CarPro Reset
2. Decontaminate with Iron-X
3. Clay with Nanoskin fine grade and Immolube
4. Polish with CarPro Essence
5. Clean with CarPro Eraser
6. Apply Cquartz UK 3.0 (two coats)
7. Finish up with CarPro Reload for some extra gloss
Sponsored