Can't fing part (plastic bezel that goes around ignition button and radio/heater knobs

[mlebofsky]

I got super glue on it and now need to replace it. I found what may be the part on allpartsmopar.com but the pic doesn't look right. Center Bezel - Mopar (6GM31TX7AC). Any help would be appreciated ...

Sponsored

 

[Rudolph Hart]

I got super glue on it and now need to replace it.M I found what may be the part on allpartsmopar.com but the pic doesn't look right. Center Bezel - Mopar (6GM31TX7AC). Any help would be appreciated ...

.

You can contact Benny @AllMoparParts.com on here, he’ll help you with this.

 

[mlebofsky]

.

You can contact Benny @AllMoparParts.com on here, he’ll help you with this.

THANKS

 

[Sting_NC_USA]

I got super glue on it and now need to replace it. I found what may be the part on allpartsmopar.com but the pic doesn't look right. Center Bezel - Mopar (6GM31TX7AC). Any help would be appreciated ...

Have you tried acetone? It's pretty effective on super glue: https://lifehacker.com/how-to-remove-super-glue-from-practically-anything-5436362

 

[mlebofsky]

Have you tried acetone? It's pretty effective on super glue: https://lifehacker.com/how-to-remove-super-glue-from-practically-anything-5436362

didn't work

 

[mlebofsky]

Can anyone who has a minute see if they can locate the part on-line? Seems like it would be a no brainer, but I can't find it ….

 

[cosmokenney]

Totally non-relevant post but I saw the title and thought perhaps you couldn't find the part because it was lost in the jeep somewhere. I was going to suggest looking in the area under/behind the e-brake. Mine has so much stuff down there I cannot even remember if anything important is in there now.

 

[jludave]

I got super glue on it and now need to replace it. I found what may be the part on allpartsmopar.com but the pic doesn't look right. Center Bezel - Mopar (6GM31TX7AC). Any help would be appreciated ...

This should be what I believe you are looking for: 6CB71TX7AE

https://www.moparwholesaleparts.com/oem-parts/mopar-trim-bezel-6cb71tx7ae

 

[AnebuR]

I got super glue on it and now need to replace it. I found what may be the part on allpartsmopar.com but the pic doesn't look right. Center Bezel - Mopar (6GM31TX7AC). Any help would be appreciated ...

Perhaps a bit of shameless self-promotion, but here's another option: https://www.jlwranglerforums.com/forum/threads/fs-silver-climate-control-trim-cover.44537/

 

[Dewey7015]

i destroyed the plastic trim ring around the start/stop button. went to the dealer, who showed me that the plastic trim is actually a non replaceable part of the ignition switch. so i ordered an aluminum ring and button that goes into a charger. it fits, but because it is aluminum, it won't let the OEM light come through, but it looks fine.
hope this helps.

 

[Dewey7015]

Well, I tried to add a darth Vader ignition switch cover and it WOULD not stick… so I got progressively more aggressive with adhesives, and the plastic gave way when I was re-doing it…

Sponsored